[REL] GP3 SERIES 2016/2017/2018 2.31
- Thread starter Slow Motion
- Start date
Slow Motion
Registered
We could only forward the request of improving the code to S397...
Slow Motion
Registered
I did several tests and everything works perfectly, no idea of the reason you read weird temperatures...
Few quick results, looking at one front tire... obviously temperatures differs depending of the load and the moment I got data, but anyway there is no doubt that everything works:
camber = -4.75° (max available value in setting): IN 102 - MID 84 - OUT 81
camber = 0.0° (min available value in setting): IN 62 - MID 78 - OUT 91
Last edited:
patchedupdemon
Registered
Your outter temp at max camber is hotter than your mid and inner, also on the lowest camber your inner is hotter than outter.
Dude that’s backwards like I said a while ago
SRGP
Registered
It is quite common with updated tyres, I have noticed, including the S397 ones.
patchedupdemon
Registered
The formula Renault 3.5 doesn’t do this and I’m sure it has the latest cmp, I will check though as you maybe onto something
Edit just checked, fr 3.5 is indeed on latest cmp.
Slow Motion
Registered
OPS! My fault I crossed values, ahahahaha
just few more data without "forcing" drive at 0° are identical for in-mid-out = 57 when with -3° (default setup) are in76 -mid 56 - out49
I can say : closed case.
Edit: I already fixed the post... sorry that now few posts look weird.
Slow Motion
Registered
well now I kept you attention today, LOL, here is something that changes what I wrote few weeks ago:
After last confidential info we got, we are evaluating to develop the new Formula 3 2019 by scratch. Further info will follow in the appropriate thread in case we'll go ahead with the project.
Thank you.
After last confidential info we got, we are evaluating to develop the new Formula 3 2019 by scratch. Further info will follow in the appropriate thread in case we'll go ahead with the project.
Thank you.
If you mean CPM (Contact Patch Model) , then it's not latest.
Slow Motion
Registered
First post has been updated to Build 2.24 for revised structure of SMMG visors and fixed rain spray
Leonardo Nogueira
Registered
Pleeeeeeease do it hehehehehe!!!!!!
DrivingFast
Registered
How responsive .... I'm still so impressed with Slow Motion Group.
Andrea Sammartino
Registered
Yesterday i've raced on medium tyres, there are my motec screens of camber at lap 8. Rear tyres seems ok, but no the front:
Inner Temps
Surface Temps
Camber:
Camber settings on setup: FL -3.5 FR -2.5
On hard tyres, this camber settings are ok, with medium and soft also if i set -4.5 isn't enought. What i wrong?
Inner Temps
Surface Temps
Camber:
Camber settings on setup: FL -3.5 FR -2.5
On hard tyres, this camber settings are ok, with medium and soft also if i set -4.5 isn't enought. What i wrong?
patchedupdemon
Registered
Isn’t the gte gt3 cmp (the latest cmp) specific to that tyre, or does it apply for all tyre types
patchedupdemon
Registered
Yesterday i've raced on medium tyres, there are my motec screens of camber at lap 8. Rear tyres seems ok, but no the front:
Inner Temps
Surface Temps
Camber:
Camber settings on setup: FL -3.5 FR -2.5
On hard tyres, this camber settings are ok, with medium and soft also if i set -4.5 isn't enought. What i wrong?
Good find, I never tried the other compounds, maybe the soft tyre walls are falling over because of not being stiff enough, along with everyone running lowest pressure
The newest cpm has been applied to GT3 GTE and some modders already use it but as far as i know most of the old cars like F3.5 dont have it yet
Some modders use CPMv2(i.e. Apex GT3, Enduracers, GP3) but probably none of them has the absolute latest(from Endurance and GT3 Packs) , since there's been significant delay between S397 updates TM, and releases new tires examples, or updates tools used to generate them.
