[REL] SMMG Formula 3 Series (2019-2020-2021-2022-2023-2024) 2.20

first draft of Macau 2019 class for Campos Racing....
As said, we'll paint only the main colors and shapes to better identify the cars, that still use the GP3 main body

20191118142615_1.jpg
20191118142556_1.jpg
 
I hope not to make you repeat Marco, but I think you did not say precisely :

In the next update, in I think 1 to 2 weeks if all goes well, the F3 will have it's physics finished at ~99% (aero + tires, etc) ?

Because while waiting for this moment I use only the GP3.

Thank you !!
 
I hope not to make you repeat Marco, but I think you did not say precisely :

In the next update, in I think 1 to 2 weeks if all goes well, the F3 will have it's physics finished at ~99% (aero + tires, etc) ?

Because while waiting for this moment I use only the GP3.

Thank you !!

On my side, without potential changes depending of new data or changes for the 2020 car and waiting for feedback by Mr. D and few real driver, as promised, the physics of the mod is the final one. I keep the 1% because I'm not an engineer and I could have made some mistake.

At the moment of the release I'll add again the changelog of the main steps in the development, anyway what will differ from the current public beta about the physics are the aero, mainly the lift data of the front wing and the sliding grip of the tyres, that are closer to the Pirelli data. Two little changes that, together the different geometry and wheelbase of the F3 vs. the GP3, brings less understeer and better lap times.

That's all.
 
SMMG F3 2020 WIP BETA 0.57 - FIRST POST HAS BEEN UPDATED

WIP version 0.57 BETA this build replaces the previous F3 2019 mod - PLEASE READ CAREFULLY: Terms of Use

WIP version 0.57 PLEASE READ CAREFULLY: Terms of Use
This mod is not to be used in public or corporate events held by public or private companies (such as simulators) without the expressed permission of SMMG.
For such circumstances, the email address listed below can be contacted for licensing agreements.
Each file of the mod cannot be edited and/or re-used in whole or in part for any reason without the express permission of SMMG.
Do not redistribute, upload, modify or sell any of our work. To honor the post season special event FIA F3 World Cup Macau 2019 (Nov. 14th - 17th, 2019) we have planned to add as bonus into the SMMG Formula 3 2020, the Formula 2019 entry list of Macau with the 2019 liveries.
For permission and licensing queries, please contact "Formula32019@gmail.com"
================
WIP version 0.57: PHYSICS from real data of manufacturers but most of the 3D in use STILL comes from our mod GP3 SERIES
To honor the post season special event FIA F3 World Cup Macau 2019 (Nov. 14th - 17th, 2019) we have planned to add as bonus into the SMMG Formula 3 2020, the Formula 2019 entry list of Macau with the 2019 liveries.
THANKS TO: haunetal1990 (original GP3 3D artist), Chris "redapg" (physics and 3D), Gilles Benoit (3D and 2D), Chris Payne & Boxer (painting), PLAYLIFE (aerodynamics), Rui Santos (extensive tests), Slow Motion (project leader, physics, 2D, painting)
"Parts of this mod were taken from rFactor 2 and are used with the explicit permission of Studio 397. These parts remain the property of Studio 397 BV and may not be re-used for any purpose, including other mods without the explicit, written permission of Studio 397 BV. For more information on rFactor 2 and Studio 397, please visit: https://www.studio-397.com/".
=================
As I wrote few time ago we took the decision to release the mod also if the graphics shows the main body of the GP3...

Some considerations:
1. the mod has the final physics (at the moment) and tuned to the performances of the real cars, but in the future we hope to have some more detailed feedback of real F3 drivers to fine tuning other details

2. the settings are the suggested of Dallara (not like the GP3 where we changed some values for decreasing the understeer). In this condition the car is neutral in slow corners but still suffers understeer like the real car. It uses less load in front because default is 16 degrees for front wing (and the GP3 was 28)!

3. on graphics side we added atm only the halo, the front and rear wings in the right position of the F3, BUT on the body of the GP3, so something can look a little in the air, because the F3 has the height of the body just a little bit higher... but it is WIP and we are working for adding new parts time by time

4. the steering wheel is finished and working with all gauges (some limitations depend of the lack of code in rF2, but with some workaround we have bars working!!!), but position in the car is the GP3 one

5. Of course everybody is welcome to contact me for info, for feedback, BUT PLEASE before read carefully what I wrote above! It is a WIP MOD at its early stage for the graphics, I can say in alpha stage... on the contrary the physics works nice!

6. Templates are not provided because they will be radically changed in the future.

Here is the link for manual dowloading:
As usual the mod is available on Steam.
The name of the mod currently is: SMMG F3 2020 WIP
The name in the launcher is: SMMG_F3_2020

Enjoy it and Merry Christmas to you guys from all of us at SMMG!
 
Back
Top