[REL] Metalmoro MR1 Prototype 1.51

I would like to fix this problem, but it is really very difficult because I don't hear anything that can annoy. At the same time I understand how much can annoy a "distorted" sound!
If you hear the real sound (there are several videos of the MR1 like the one in post #35) we can say we are not far from him and the owner of the MR1 asked specifically for enhancing some rattle, etc...
What I could try to do is to decrease the overall saturation of the whole sampled sounds, maybe it can be of help, but without perceiving this noise just now, it is not so easy.
The question is: what does it happen if you rotate the switch of sound speaker or decrease the overall volume in rFactor2? Maybe it is much easier than re-sampling sounds.
Thank you
I'll try to listen to the videos before taking the car for a spin, and play with these settings tonight, I'll let you know. I understand it can be really difficult to talk about sounds: we have different devices, different ears, then english is not my mother tong…;) Thank you!
 
I would like to fix this problem, but it is really very difficult because I don't hear anything that can annoy. At the same time I understand how much can annoy a "distorted" sound!
If you hear the real sound (there are several videos of the MR1 like the one in post #35) we can say we are not far from him and the owner of the MR1 asked specifically for enhancing some rattle, etc...
What I could try to do is to decrease the overall saturation of the whole sampled sounds, maybe it can be of help, but without perceiving this noise just now, it is not so easy.
The question is: what does it happen if you rotate the switch of sound speaker or decrease the overall volume in rFactor2? Maybe it is much easier than re-sampling sounds.
Thank you

I think the easiest way to hear it would be with a stereo headset.
 
I'll do my best. I need time because now I'm busy with the GP3. I can try it with headset, thanks for suggestion.
And, when I'll work on it, maybe it could be a good idea if you both could test a beta before the public release.
Thank you
 
I'll do my best. I need time because now I'm busy with the GP3. I can try it with headset, thanks for suggestion.
And, when I'll work on it, maybe it could be a good idea if you both could test a beta before the public release.
Thank you

Sure! Thank you for looking into it. In the meantime, later today I'll try to tweak rF2 sound settings to see if it can be worked-around this way and report.
 
So I listened again at the video from post #35. I must admit I had forgotten how good the sound was there, I like it! It is much deeper, with more details, than what I can hear in game with my headset. I played with the different volume sliders, tried to lower the number of effects but didn't get a significant change unfortunately. I thought I found something when trying the 7.1 sound settings; but then everything was much quieter, I could barely hear the engine! And after increasing the overall volume so I could hear something, I had much less details. Probably logical, since with my headset I should have only part of the sounds then? But it was still quite high-pitched compared to the video...
Not sure if this will help you... Take your time of course, this should remain a hobby for you! And the GP3s must keep you busy for sure! :)
 
I've also try various things including using 7.1 (enabled in the configuration program of my sound card) with my Hi-Fi headphones, to no avail. It seems slightly less pronounced (but still jarring and fatiguing), but this is because of the different audio mix in 7.1. Also huge loud distorted downshifting sound.
 
MR1 is now updated to the full rain features and we also improved other details for graphics and physics. I hope to release the new public build soon.

Main changes are:
  • added brake response curve
  • added driver's change
  • improvements to CPM tires
  • updated shadows to new rules
  • updated undershadows to new rules
  • full raindrops and wiper effects (Chris "redapg & Slow Motion)

20180521184456_1.jpg
20180521184420_1.jpg
 
Last edited:
Just gave the new 1.36 a race around Silverstone national circuit. Thank you again for another wonderful mod. A real pleasure to drive with great (ease of) control on the counter-steer.
 
I was thinking to add the position led to this mod that IRL ran few endurance races... In addition the led during the pit change to yellow to show the elapsed time. Does it make sense?

This is WIP, led font, etc... need to be correctly positioned a little bit... but what is your opinion guys?

20180711141010_1.jpg
 
I was thinking to add the position led to this mod that IRL ran few endurance races... In addition the led during the pit change to yellow to show the elapsed time. Does it make sense?

This is WIP, led font, etc... need to be correctly positioned a little bit... but what is your opinion guys?

View attachment 15629
Can you put it behind the rear window maybe?
Nel finestrino posteriore va...per capirci meglio lol
 
Sound is still garbled and very unpleasant at some engine regimes especially when downshifting. This is the only car in rF2 that is like this. That's the only thing that prevents me from spending more than 10 min at a time with this car as my ears tell me to use something else...
 
Sound is still garbled and very unpleasant at some engine regimes especially when downshifting. This is the only car in rF2 that is like this. That's the only thing that prevents me from spending more than 10 min at a time with this car as my ears tell me to use something else...
We have discussed it long time ago also with the owner of the car, sorry... It is more or less what happens also with the abarth... For instance on my pc I use a 7.1 speakers and don't hear a bad
 
I was thinking to add the position led to this mod that IRL ran few endurance races... In addition the led during the pit change to yellow to show the elapsed time. Does it make sense?

This is WIP, led font, etc... need to be correctly positioned a little bit... but what is your opinion guys?

View attachment 15629
Yes please! We are using this great car in an Endurance championship with S397 Endurance pack (different class of course haha) Our first race is this weekend. See details here http://rf2asia.com/current_series/world-tour-2018
 
Just sayin'... I am only 5 seconds off the slowest LMP3 car in qualifying and 10 seconds off the slowest GTE. THis runs in a different class, but if people crash out, I can both have fun and get points!. Someone complained about the roll bar blocking the view (cos driver is in the middle of the car) but you can disable that in the tuning menu.
 
Just sayin'... I am only 5 seconds off the slowest LMP3 car in qualifying and 10 seconds off the slowest GTE. THis runs in a different class, but if people crash out, I can both have fun and get points!. Someone complained about the roll bar blocking the view (cos driver is in the middle of the car) but you can disable that in the tuning menu.
Great! I'll email the owner of the real car I'm sure he will be pleased.
About the diagonal bar, we have added the option for removing it for a better view, like you remarked.
Asap I'll release a build with the position led as default option, but in case you need it for the champ in closest time, email me and I'll do my best for a pre-release to be used only by participants to your champ.
Thank you
 
Back
Top