[REL] rFactor2 Log Analyzer ver. 2. With offline and league Championship Manager

[David Acorn]

No, there is no way to reset Dedi mode admin name/password. You will have to un-zip new r2la instance and start it from scratch and enter new name/password in the first form.


It does not really matter for r2la whether your championship is online or offline. You just assign results that you want to races that you yourself create in r2la. r2la does not interact with rFactor2 and does not change anything there, it just reads xml log files.

Create a championship in r2la, then create Races for your championship and as soon as you've run some races in offline mode in rFactor2, pressed "Refresh" in r2la, then you can assign that race results to championship races.

You will need to make sure that AI names list stays consistent through your offline championship races. Not all cars/mods in rF2 support that. With mods, that have season drivers assigned to cars it is easier (Enduracers mods, some F1/Indycar mods) - you will have to count number of cars for that mod/season in the list in UI and set AI count to that number minus 1 (you car).

With S397 GT3 I had to go to track without AI, then add AI cars one-by-one with "Add AI" button. Like, 5 Mercs, 5 McLarens and so on. Then AI names were consistent every time.

Thanks for getting back to me, I have it working now, for some reason when I loaded it the first time the create new Championship was not showing, I did a restart then it appeared. Really like this app you built, it works great.

To make sure the AI names remain the same can I assign this when making the mod? I am using the URD DTM 2018 cars.

 

[Nibo]

To make sure the AI names remain the same can I assign this when making the mod?

You probably can. I can not say for sure, because I don't do mods, don't know how it actually works.

 

[Kael Parkinson]

Hi there, I have a problem. When I run the r2la.bat file, it does not seem to open a server on the address. When I go to the address, it just says that the requested resource is not found. This is probably an issue on my side, but would you have any idea about why this is happening? Thanks!

 

[Nibo]

Probably default r2la server port (8000) is already in use by some other program on your machine.

You need to start web2py on other port. You can do this in 2 ways:

1. Start rF2 Log Analyzer ver. 2.058.3x\web2py\web2py.exe and enter some other number in Server Port field. Try 8080, 8100 etc.

2. If you need LiveTiming, then open rF2 Log Analyzer ver. 2.058.35\r2la_live_timing.bat file in text editor and add "-a 'x' -i 127.0.0.1 -p 8000" to last line, file must look like this (enter your new port number after -p):

cd web2py
start web2py.exe -S r2la -M -R applications/r2la/private/live_timing.py
start web2py.exe -a 'x' -i 127.0.0.1 -p 8000

Where 'x' is a password for web2py and does not really matter.

You will need to enter the same new port number in your browser, like http://127.0.0.1:8080

 

[Kael Parkinson]

Probably default r2la server port (8000) is already in use by some other program on your machine.

You need to start web2py on other port. You can do this in 2 ways:

1. Start rF2 Log Analyzer ver. 2.058.3x\web2py\web2py.exe and enter some other number in Server Port field. Try 8080, 8100 etc.

2. If you need LiveTiming, then open rF2 Log Analyzer ver. 2.058.35\r2la_live_timing.bat file in text editor and add "-a 'x' -i 127.0.0.1 -p 8000" to last line, file must look like this (enter your new port number after -p):

cd web2py
start web2py.exe -S r2la -M -R applications/r2la/private/live_timing.py
start web2py.exe -a 'x' -i 127.0.0.1 -p 8000

Where 'x' is a password for web2py and does not really matter.

You will need to enter the same new port number in your browser, like http://127.0.0.1:8080

changing the port worked. Thank you!

 

[Rantal]

hi guys, i want to ask, if it was possible to delete a time of a driver in the records tab? help my thanks

 

[mama_mia]

Hi @Nibo,
Can you please add the possibility to choose the start/finish hour for hosted competitions?
The timezone that's being used by r2la does not match my timezone, and the competitions are starting/ending at 1AM.

Thank you

 

[Nibo]

Rantal, I answered similar question on previous page - https://forum.studio-397.com/index....ampionship-manager.48117/page-92#post-1036322

mama_mia, I can not add that for same reason, I can not deal with various time zones that users have. You (admin) select start and end date for competition. Competitions start and end at 00:00 UTC on selected days for all users. It is up to every user to convert his times to UTC and back to see when competition will end. Competition time countdown widget should work correctly for all users if their timezone is set correctly by operating system, but I can not guarantee all cases.

 

[Tommy78]

Hi Nibo,

I just set up the server, everything working on both server instance except the Live Timing, which shows "No live sessions found Polling...."
I tried with 8000 and 8080 for server port. I tried to add the ip and port into r2la_live_timing.bat
I added the shared memory dll as well, and wrote into the custompluginvariables.json file.
I have no idea.

 

[Chris English]

If you need to remove only one lap time from driver, it is more complicated (and I did not test this). Find that <driver> block, find a lap time in question in <Lap ... > tag and substitute lap time value with "--.----" (without quotes). Then find BestLapTime tag for that driver and substitute it with new best lap time or if it does not exist, remove BestLapTime tag completely.

Just want to say this works, I replaced the offending lap with --.---- and substituted the best lap time with their 2nd best and it's worked fine.

 

[Nibo]

Tommy78, in latest versions of r2la I added "Live Timing troubleshooting" text to r2la "Help" page. Please read and try all things that described there. You can tell me here if you find something after that.

 

[Tommy78]

Tommy78, in latest versions of r2la I added "Live Timing troubleshooting" text to r2la "Help" page. Please read and try all things that described there. You can tell me here if you find something after that.

Yeah now its good when i set back DedicatedServerMapGlobally to 0 again.

 

[ledel]

Bug report:

There are so many files(maybe more than 500000) in this folder:
d:\rF2LogAnalyzer\web2py\applications\r2la\sessions

is there any options to reduse it? thanks

 

[Nibo]

Yes, you can just clear that folder from windows, delete all files and folders in it. Stop r2la before deleting, then start it again. You will have to login in r2la again if you are r2la DEDI admin.

 

[cialtronen]

@Nibo I noted that sometime I have the data about the fuel consumption and tyre wear, while other time no. I understood that if I play locally on my pc I have the data, while if I play on server I don't because these data would be available only on the server xml files. Is it correct?

 

[Nibo]

Yes, that is correct.

 

[cialtronen]

thanks @Nibo I did some long runs on a server and I was then looking on r2la to undestand the better strategy, but...

 

[ASR Motorsport]

@Nibo , love this software.

Now this might seem a very odd question, but is there a way to bypass the 'stream' portion of the .XML? The reason I ask this is I am using this software for another small series I run that is run on a different platform. I import the details of results manually into an .XML template I have set up. (long process, but I really like the details your software creates.) I am able to generate driver,team and class standings but not round results as that uses the stream portion of the .XML file by the looks of it. Is there a way of bypassing the stream section or use another part of the .xml file and still get a results page or is that not possible?

Apologies if this comes across as a dumb question. I am not the most technological person. Cheers.

 

[Nibo]

I don't use <stream> tag of the xml for r2la. What do you mean by "round results" that you can not generate?

 

[ASR Motorsport]

I don't use <stream> tag of the xml for r2la. What do you mean by "round results" that you can not generate?

Sorry, I did a bit more investigating and I think I have found my problem. As my races (GTS) don't log each lap, only best lap and finishing time, I was removing the lap and sector section or each drivers .XML section. This is what is causing the non showing of results I think. (added pic for reference.) Still getting points and class points. So now knowing that, I don't think their would be a way of bypassing that section, unless you know of a way?
Cheers.