Wheel turns too slowly

Discussion in 'Technical & Support' started by seamount, Dec 28, 2023.

  1. seamount

    seamount Registered

    Joined:
    Feb 8, 2016
    Messages:
    57
    Likes Received:
    59
    Hi, I came back to rf2 after a while and now my wheel turns too slowly in the corners, above all in slow corners i have to turn it too much (it's not understeer). Maybe a parameter in any configuration file was changed without I wanted to ?
    If I want to reset the wheel configuration and do it from scratch, what should I do/delete ?
    Or any other suggestion to solve my problem ?
    I use "auto" in my fanatec wheel, should I use 900?
    And in game in "calibrate controls" what should I use for the wheel parameters ?
     
  2. Lars Otto

    Lars Otto Registered

    Joined:
    Mar 8, 2013
    Messages:
    43
    Likes Received:
    104
    I had the same Problem a while ago.
    For me it was the "Steering Help". It was turned on. Turn off
    Hope thats helps

    cheers
     
  3. seamount

    seamount Registered

    Joined:
    Feb 8, 2016
    Messages:
    57
    Likes Received:
    59
    Steering Help it is already 'off'

    what do you use in these parameters ?
    - rotation limit mode
    - max wheel angle mode
    - default max wheel angle
    - range set by vehicle
     
  4. Lazza

    Lazza Registered

    Joined:
    Oct 5, 2010
    Messages:
    12,413
    Likes Received:
    6,616
    You'll usually have fewest issues if you set your wheel to a large angle (900 or 1440 or whatever it allows), and in the game select:

    -software
    -custom
    -900 (or whatever your wheel is set to)
    -true/ticked (vehicle set)

    And double check steering help just to make sure. And unassign its control in settings.
     
  5. Lars Otto

    Lars Otto Registered

    Joined:
    Mar 8, 2013
    Messages:
    43
    Likes Received:
    104
    I have:
    rotation limit mode: Device Driver
    max wheel angle mode: Custom
    default max wheel angle: 1080 (depends on your max wheel range of your Wheel)
    range set by vehicle: on
     
  6. davehenrie

    davehenrie Registered

    Joined:
    Jul 6, 2016
    Messages:
    7,499
    Likes Received:
    4,410
    Have you calibrated the wheel by moving it fully left and holding it there while clicking on the left button, repeat to the right and repeat to the center. Then the slider underneath. This is not iR, to get full linearity, set the slider to 100% which is dead center.
     

Share This Page