Wheel issue

Discussion in 'Technical & Support' started by HugoF, Oct 23, 2023.

  1. HugoF

    HugoF Registered

    Joined:
    Oct 23, 2023
    Messages:
    1
    Likes Received:
    0
    Last edited: Mar 19, 2024
  2. davehenrie

    davehenrie Registered

    Joined:
    Jul 6, 2016
    Messages:
    7,492
    Likes Received:
    4,407
    ALWAYS remember to power up your wheel BEFORE launching rF2. If the wheel isn't visible to rF2 during the boot process, you cannot try to use it after that, You would have to exit rF2, power up your wheel and then restart rF2.

    Unplugging may have allowed Windows to re-assign the joystick number to your wheel. You can go to the Assign & also the Calibration screens via the GEAR icon at the upper right. When you assign a wheel and it says turn left, turn it alllllll the way. Same to the right.
    Then when you calibrate the wheel, turn it all the way to the left & hold it against the bumpstop. THEN click on the SET Max Left button. Repeat for the right, move the wheel back to center and click on the center button.
     
    RaceNut likes this.

Share This Page