Toe-In settings (bug?)

[Gringosan]

Hi,

Toe-In angle adjustment is applied 1/2 the value selected in the setup menu to the left and right wheels. For example in the setup menu 2 degree of toe in, will set the lhs wheel with 1 degree toe in and also the rhs wheel with 1 degree toe in. Should it be 2 degree applied to each wheel?

What is the logic for dividing the toe in angle between the 2 wheels?
Cheers

 

[redapg]

Do you mean in the Physics Spreadsheet?
It is correct.
If you want to achieve a Total of 2 mm, each Site has to get 1 mm.

 

[Gringosan]

Do you mean in the Physics Spreadsheet?
It is correct.
If you want to achieve a Total of 2 mm, each Site has to get 1 mm.

Hi, I think we might be talking about 2 different things. I expanded my OP to make it more clear. Thanks for your reply.

 

[redapg]

Hi, I think we might be talking about 2 different things. I expanded my OP to make it more clear. Thanks for your reply.

No, we talk about the same Thing.
It's easier to explain with mm.
You can measure the Toe in or out, as the Distance between the inner Rim Horn of the 2 Wheels on the same Axle, in the Height Center of the Wheel.
If it's 1422 mm for Example and you want to get 1420, you adjust it by 1 mm at each Site, to stay symmetrical.
But as the Result you have adjusted it by 2 mm total.