Setting for gtx1050ti(4gb)

Discussion in 'General Discussion' started by Sky8lade, May 6, 2021.

  1. Sky8lade

    Sky8lade Registered

    Joined:
    Apr 29, 2021
    Messages:
    10
    Likes Received:
    0
    Hi guys

    I am very new to rFactor2. I have just been getting used to the UI and done a lot of practice with driving and have improved a lot.

    I now have a question with regards to my budget setup and if anyone has similar. I basically want to know what settings work best.

    My PC has the following:

    Processor: AMD ryzen 5 1600
    Graphics card: 1050TI (4gb oc edition)
    Motherboard: B350 tomahawk
    Ram: 32gb
    Monitor: 60hz (pc only allows 60hz so using a 60hz monitor)
    Storage: OS installed on SSD, rFactor2 installed on standard HDD

    I am currently using medium to high(not ultra) settings in the game but still experience some screen freezes.

    Is there anything specific I can try?
     
  2. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    i don t like to speak in the empty
    you must doxnload f1 1988 on worshop and buy circuit d azur on shop of studio
    and try to do 1.28.505 or better
    this game is really enjoy hope you ll be happy after that
    what s your wheel ?
    regards
     
  3. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    gtx 1070 ti amd ryzen 5 3.2 ghz ssd samsung 850 evo screen 32" 32 go memeory from corsair
     
  4. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    msi 370 x
     
  5. Lazza

    Lazza Registered

    Joined:
    Oct 5, 2010
    Messages:
    9,495
    Likes Received:
    4,515
    4GB video card could be an issue on some tracks. Pressing Ctrl-F in the game should display a graph which indicates memory use, and you should be able to get frame rates and time as well (maybe try a few presses, it toggles a couple of different things). Ctrl-C is good also to check CPU use, in case anything strange is going on there. The purple section (bar, and histogram) will in particular will indicate if it's causing any freezes.
     
    Last edited: May 6, 2021
  6. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    your mother board is certainly obsolete waht s your OS ,?
     
  7. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    yes but memory activity depend of the applications turn on PC
     
  8. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    in fact we are brother in configuration
    Where do you live ?
     
  9. Rastas

    Rastas Registered

    Joined:
    Feb 17, 2017
    Messages:
    528
    Likes Received:
    1,132
    I have the same card,all in ultra less the rain drops and post processing in med :)
     
  10. Yigit Yusuf Mutlu

    Yigit Yusuf Mutlu Registered

    Joined:
    May 3, 2016
    Messages:
    108
    Likes Received:
    61
    how you put everthing to ultra with gtx1050ti 4gb vram. just nords or lemans or spa track above the vram usage of 4gb of your card, with there new tracks the vram usage is huge, and with official s397 gt or protocars, with lots of opponent, it is bigger.
     
  11. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    in second markett there is a lot of products coming from uncle sam try their product it s over the europe or asia
     
  12. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    but colons are not unique
     
  13. Rastas

    Rastas Registered

    Joined:
    Feb 17, 2017
    Messages:
    528
    Likes Received:
    1,132
    I normaly do not use opponents is devmod,yes i got less fps in Nords,the rest runs very good.Again whit rain drops turning off,oh and my card is overclocked,900mhz in memory clock and 100mhz in gpu clock,and more voltage too,do not pass the 65 degrees celcious,great card actualy.
     
  14. Sky8lade

    Sky8lade Registered

    Joined:
    Apr 29, 2021
    Messages:
    10
    Likes Received:
    0
    Windows 10 pro.
     
  15. Sky8lade

    Sky8lade Registered

    Joined:
    Apr 29, 2021
    Messages:
    10
    Likes Received:
    0
    I press Ctrl+F, frame rates go above 60, I think this is the problem. It goes to 73 sometimes
     
  16. Sky8lade

    Sky8lade Registered

    Joined:
    Apr 29, 2021
    Messages:
    10
    Likes Received:
    0
    Logitech G920
     
  17. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    64 bits ?
    i hope for a future 128 bits if it s in the plan of the gates s company
     
  18. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    i am agree to accompagm you in the beginning of this simulator
     
  19. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    my drive is since january a thursmater ts xc pc
    i recommand it for feeling i don t know about the new dd fanatec or other
    to choose ypour ffb you must open controller in userdata folder of the game
    some can explain you what is it
     
  20. jepeto

    jepeto Registered

    Joined:
    Oct 5, 2013
    Messages:
    228
    Likes Received:
    36
    personnaly for grphism that is very confort important i have set without dsr and put in high level the texture
    i let the game for anticrenelage to set
    in display i put off to all except for track low player ultra texture ultra and x8 anistropic fps is 250 on azur track with f1 88 mod
     

Share This Page