off road jolts

Discussion in 'General Discussion' started by Holzvergaser, Jan 11, 2012.

  1. Holzvergaser

    Holzvergaser Registered

    Joined:
    Dec 14, 2011
    Messages:
    27
    Likes Received:
    2
    i found the setting...

    Code:
    Jolt magnitude="0.50000" // How strong jolts from other cars (or walls) are.  Suggested Range: -2.0 to 2.0.
    ...in controler file in player folder. when i change it from 1.5 default to 0.5 as seen here off road jolts are fine for me, at least it seems to me. give it a try.
    there is also rumble strip magnitude but it was 0.0 fo rme default!?
     
    Holzvergaser, Jan 11, 2012
    #1
  2. Marek Lesniak

    Marek Lesniak Car Team Staff Member

    Joined:
    Oct 6, 2010
    Messages:
    1,585
    Likes Received:
    101
    Yes, fake rumble strip effect is off by default (and that's good).
     
    Marek Lesniak, Jan 11, 2012
    #2
  3. vilivili

    vilivili Registered

    Joined:
    Apr 1, 2011
    Messages:
    38
    Likes Received:
    0
    I'm having too much jolt also but I found no difference whether I set jolt to 0.1 or 1. I tried editing both files, rFactor2\UserData\player\Controller.ini and rFactor2\UserData\Controller\Logitech G25 Racing Wheel USB.ini

    any help would be appreciated!
     
    vilivili, Jan 12, 2012
    #3
  4. krivjur

    krivjur Registered

    Joined:
    Oct 5, 2010
    Messages:
    64
    Likes Received:
    7
    I don't think Jolt magnitude affects the off road / grass feel (didn't notice real difference even it on 0). If it does the description is wrong. You could cure it with editing track .tdf but that would mean mismatch of course.

    http://isiforums.net/f/showthread.p...ng-a-strong-noise-rattle-with-your-controller...
    Haven't tried the Steering Torque Filter yet, as I don't see the grass as huge problem, just trying to stay away from it. Edit: Okay, it does work rather good if off track is your problem, I'd rather have the detail on for the on track FFB though.


    Pulled few of the values for BumpAmp and BumpWaveLen from .tdf. The off track bumps have higher amplitude in rF2 and they happen more frequent.

    [TABLE]
    [TR]
    [TD][TABLE]
    [TR]
    [TD]Surface[/TD]
    [TD]rF1 default (Mills) Amp[/TD]
    [TD]rF2 Mills Amp[/TD]
    [TD="width: 153"]rF1 default (Mills) Length[/TD]
    [TD="width: 112"]rF2 Mills Length[/TD]
    [/TR]
    [TR]
    [TD]Roads[/TD]
    [TD]0,010[/TD]
    [TD]0,001[/TD]
    [TD]13[/TD]
    [TD]3[/TD]
    [/TR]
    [TR]
    [TD]Astroturf[/TD]
    [TD][/TD]
    [TD]0,007[/TD]
    [TD][/TD]
    [TD]1[/TD]
    [/TR]
    [TR]
    [TD]Dusty berms[/TD]
    [TD]0,010[/TD]
    [TD]0,050[/TD]
    [TD]13[/TD]
    [TD]1,5[/TD]
    [/TR]
    [TR]
    [TD]Grass[/TD]
    [TD]0,050[/TD]
    [TD]0,060[/TD]
    [TD]8[/TD]
    [TD]1,7[/TD]
    [/TR]
    [TR]
    [TD]rough Grass[/TD]
    [TD]0,060[/TD]
    [TD]0,070[/TD]
    [TD]6[/TD]
    [TD]1,9[/TD]
    [/TR]
    [TR]
    [TD]Gravel[/TD]
    [TD]0,052[/TD]
    [TD]0,090[/TD]
    [TD]4[/TD]
    [TD]1[/TD]
    [/TR]
    [TR]
    [TD]Dusty Grass[/TD]
    [TD]0,050[/TD]
    [TD]0,060[/TD]
    [TD]8[/TD]
    [TD]1,7[/TD]
    [/TR]
    [TR]
    [TD]Dirt[/TD]
    [TD][/TD]
    [TD]0,085[/TD]
    [TD][/TD]
    [TD]1[/TD]
    [/TR]
    [/TABLE]
    [/TD]
    [/TR]
    [/TABLE]
     
    Last edited by a moderator: Jan 12, 2012
    krivjur, Jan 12, 2012
    #4

Share This Page