Fanatec CSR Elite Pedals rFactor set-up problem

Discussion in 'Hardware Building/Buying/Usage Advice' started by Caterham_Super_7, Apr 1, 2014.

  1. Caterham_Super_7

    Caterham_Super_7 Registered

    Joined:
    Feb 4, 2012
    Messages:
    95
    Likes Received:
    1
    Hi Guys,

    No matter what I do I cannot get these pedals to work with rFactor. I downloaded driver v177 from Fanatec and the pedals look to be working fine. rFactor 2 works well but when i try with rFactor 1 I cannot get the things to calibrate at all. The throttle pedal seems to be on Full all the time. Ive pressed "Brake" and "Clutch" to overwrite the action but when I do that the range is "Red-ed" out and shows no movement. Anybody have a similar problem and managed to fix it ?
     
  2. Caterham_Super_7

    Caterham_Super_7 Registered

    Joined:
    Feb 4, 2012
    Messages:
    95
    Likes Received:
    1
    I should add that I am using a G-27 wheel
     
  3. GTFREAK

    GTFREAK Registered

    Joined:
    Mar 27, 2011
    Messages:
    340
    Likes Received:
    5
    Do you have anything else plugged in as a controller? I believe there is a maximum number of controllers you can use with the original rFactor. I don't know what that number is, though.

    This has happened to me before and it happened because I use a Space Navigator mouse, which can act as another game controller in some games. Just a thought...
     

Share This Page