Brake setup help

I seem to struggle with brake lock ups.

I have HE Sim Pedals Pro

This is the setup in RF2:



Is this wrong and if so what should I change it two.

 

I have HE pedals and 100% sensitivity is ok.
Also, have you used diview to configure the pedal correctly?

 

I'd almost go a little under 100% so that the brakes don't 'bite' immediately.

 

Well I think so

 

I would reduce sensitivity to 100 or less, and set max at a higher max than actually is.
What you are doing with your actual setup is reducing the useful range, and beside doing this, you are reaching the max faster. What you would want is to be able to fine tune your braking power to have maximum braking power but no lockups, to stay here with your foot, you need to have a more gradual ramp.

 

Yes, I thought it was because of the 200% sensitivity curve but you are right. You have to press the pedal to the fullest and then hit the max button, right now you are losing the final part of the braking range.

 

Thanks guys

So more like this?

 

Yeah, perfect, try it and tell us if you still have the problem.

 

Setup the min and max there to avoid problems