AIW ISSUE

Discussion in 'Track Modding' started by anaussiejoe, Mar 14, 2018.

  1. anaussiejoe

    anaussiejoe Registered

    Joined:
    Dec 15, 2015
    Messages:
    22
    Likes Received:
    27
    Hi all. I'm trying to convert a RF1 track to RF2. The game crashes at the end of the load screen
    in ModDev. I removed the AIW file and the track loads just fine. So I then made a new AIW file Via ModDev
    but when I load the track again It crashes. Has anyone else had this issue or know what could be causing
    it to crash.
     
  2. anaussiejoe

    anaussiejoe Registered

    Joined:
    Dec 15, 2015
    Messages:
    22
    Likes Received:
    27
    I have found the problem..
    Admin, You can delete this thread.
     
  3. lagg

    lagg Registered

    Joined:
    Oct 1, 2012
    Messages:
    1,120
    Likes Received:
    776
    The solution could be usefull for other
     
  4. anaussiejoe

    anaussiejoe Registered

    Joined:
    Dec 15, 2015
    Messages:
    22
    Likes Received:
    27
    Yes agree Lagg.
    The problem was that when coping the AIW and the CAM file from RF1, I also copied the
    GDB file which was the issue. I rewrote the GDB file and that fixed my issue.
     
    lagg likes this.
  5. Intimidator

    Intimidator Registered

    Joined:
    Mar 23, 2018
    Messages:
    8
    Likes Received:
    2
    I have the same issue while trying to make a new AIW for an existing rf2 track. As long as there is no AIW, everything runs fine in DevMode. The car appears somewhere in the forrest but I am able to move it on track and record the main path and the pitlane path. As soon as I try to save my achievements after connecting these paths and reload the track, it crashes at the very end of the loading screen. When I try to use the original AIW when loading the track, it crashes as well. What might be wrong with the GDB or is there another problem somewhere which I did not recognize yet?
     
    Last edited: Apr 12, 2018
  6. SmellySkidmark

    SmellySkidmark Registered

    Joined:
    Jan 11, 2012
    Messages:
    363
    Likes Received:
    100
    When you make the main and pit paths you have to "join as branch" did you do that?
    And also make sure you set a garage and a pit bay, then save your werk. Reload does it werk now?

    SS
     
  7. machine

    machine Registered

    Joined:
    Jan 31, 2011
    Messages:
    352
    Likes Received:
    222
    When I started converting tracks, rather than taking a gdb from rf1 and converting it, I took the gdb from Joesville rF2 and edited it for my track. That way I knew I had rf2 compatibility. Same for other files. Except AIW. A RF1 AIW should load in Dev mode. Then Save.
     

Share This Page