g29 asynchronous

it´s starting to get embarrassing: i´ve another problem ´caus my logitech g29 is asynchrnous. if i turn my wheel 90 degrees right the ingame drivers animation shows me only about 20 same if i turn left

 

I think this is a bug with rF2 & G29, you probably have to set the degrees manually.

 

I've been having this problem recently too. I have a T500 however.
https://forum.studio-397.com/index.php?threads/cant-get-wheel-to-match-on-screen.54027/#post-871857

I'm still trying to figure out what is happening.

 

Steering assist on or off? Another user had a similar "problem", promptly removed disabling steering help assist.

 

i turned every assists off

 

the center is synchronousbut after turning the whell about 20 degrees it´s gettin assynchronous i don´t no if i did what you told me right so please explain it to me step by step (i´m dumb, i´m sorry)

 

First reply might be the answer. If your wheel is stuck on 900° you will turn it farther than many on-screen wheels. How far is your wheel turning before stopping?

 

I've noticed another weird thing. If I use a car where the wheel seems to sync up ok it will be perfect if I turn the wheel clockwise, however if I turn the wheel anti-clockwise it is a few degrees off (comparing it to the bottom spoke of my wheel).

 

i´m sorry but i don´t really get what you mean

 

Go to "...\UserData\Controller\", then edit "Logitech G29 Driving Force Racing Wheel USB.json".
Find this entry in JSON and change values to :
"Steer Ratio Speed":0,
"Steer Ratio Speed#":"Speed at which low speed steering lock override ends (for pit navigation, units are meters\/sec, 0.0 to disable)",
"Steering Sensitivity":2,
"Steering Sensitivity#":"0.0=low 1.0=linear 2.0=high. These are applied after other controller effects like deadzones, digital",

Then launch game, in control panel clic "Detect", your G29 parameters are loaded. Set your control. You must chose "Vehicule set" (or "Car set" I'm not sure I've french UI
Then for FFB smoth on 7 is good, minimum torque on 16% is a good value for me

Careful don't work for street cars (NSX or C6) where Steering Sensitivity value "1" it's good with 900° rotation.

 

at first thank you second i did everythin you told but i cant find "detect" i´m sorry

 

Main menu -> Options -> Controls -> Detect

 

ok now it says [JSON] failed to perform operation, unsupported type

 

Check there no error on format by a mistake, normaly if you change only the value there are no problems (example miss an ',' after a changed value)

 

ok i´ll check everything again

 

i checked it twice but i couldn´t find any mistakes :/ it says:
"Steering Sensitivity":2,
"Steering Sensitivity#":"0.0=low 1.0=linear 2.0=high. These are applied after other controller effects like deadzones, digital",

 

Delete the file and on steam right clic on the game you must have Local files and option to verify the integrity (on french UI is Propietés->'new little windows' Fichiers locaux -> Vérifier l'intégrité du cache du jeu...) this recreate the file.
Try detect again in game to check is Ok and then re-try modifications.

 

i did everything again and in the code it sasy
"Steering Sensitivity":2,
"Steering Sensitivity#":"0.0=low 1.0=linear 2.0=high. These are applied after other controller effects like deadzones, digital",
"Steering Wheel Range":720,
but i´ve still the same issues

 

After delete, normaly, at "Steering Sensitivity" you must have 1, have you try to detect after delete and before make some modifications ?

 

How far is your wheel turning, physically?