NVIDIA users - a new Antialiasing setting to try.

Discussion in 'General Discussion' started by ForthRight, May 16, 2014.

  1. ForthRight

    ForthRight Registered

    Joined:
    Jan 12, 2012
    Messages:
    231
    Likes Received:
    4
    I've edited the thread title as I think this is worth trying for anyone who is using a more modern Nvidia card, rather than just those who were using 4x SparseGrid. If you are using 2xSparseGrid or one of the normal AA settings (4xMultisampling for example) this might cause a slight drop in framerates (or it might not), BUT I still think it's worth trying simply due to the possible increase in image quality provided.

    Original post below...
    _________________

    I've been messing around with AA settings trying to get the best image quality whilst keeping a solid framerate and I've found a setting which gave me the image quality of 4x SparseGrid (or very close to it) but with a 10-15fps improvement over using 4xSGSS. I know some people think SparseGrid is unnecessary now but I've continued to use it with rFactor 2 (until now that is).

    Obviously this setting might not work for others but it's worth trying.

    First of all you'll have to disable the heat haze effect as it is incompatible with this AntiAliasing setting (the heat haze graphic glitches), so change this PLR file line to 0 (default is 30),

    Heat FX Fade Speed="0.00000"

    Then go into Nvidia Inspector, disable your SparseGrid (Transparency Supersampling=Off), set Antialiasing Mode to 'Override any application setting' and change the Antialiasing Setting to '8xS [Combined: 1x2 SS + 4x MS]'.

    Obviously your rFactor 2 Config AA setting should be 'None'.

    There might be other bugs with this AA setting that I haven't found yet but so far the game looks great and runs very nicely.

    That is all.
     
    Last edited by a moderator: May 20, 2014
  2. jimcarrel

    jimcarrel Registered

    Joined:
    Jan 15, 2012
    Messages:
    1,720
    Likes Received:
    24
    worked for me, (thanks). Totally forgot to check fps before changing from SparseGrid, but everything is still is still crisp and clear, including chainlink fences at Mid Ohio. Most noticeable was the steering input and response. All good for me.
     
  3. Paul_Ceglia

    Paul_Ceglia Registered

    Joined:
    Jan 14, 2012
    Messages:
    676
    Likes Received:
    13
    I wish we could mark favorite threads for ourselves, this would one of them thanks for sharing, I haven't tried this but when I get home I will. Thank you
     
  4. Coanda

    Coanda Registered

    Joined:
    Jun 9, 2013
    Messages:
    689
    Likes Received:
    3
    I tried your new setup on my 780ti over my previous 4xSG. Very nice. 20-30fps increase on Silverstone for very similar AA quality. There maybe a very slight increase in jaggies however I'll take the extra frames.

    Cheers for sharing.
     
  5. Barf Factor

    Barf Factor Registered

    Joined:
    Nov 2, 2012
    Messages:
    403
    Likes Received:
    18
    I'm trying your settings now, it does look very good. I do get some distant shimmery/jagged shadows on the road but the framerate is significantly better (about 30% improvement).
     
  6. Magus

    Magus Registered

    Joined:
    Jun 27, 2012
    Messages:
    863
    Likes Received:
    557
    Used these settings with Triples/multi/noHDR and getting much better results both fps and looking. Before I was just using in-game AA @ Level 4. Thanks!
     
  7. Paul_Ceglia

    Paul_Ceglia Registered

    Joined:
    Jan 14, 2012
    Messages:
    676
    Likes Received:
    13

    I don't have anything that says 1x2ss 4x ms in the AA mode pull down. I m not sure what too try?
     
  8. MJP

    MJP Registered

    Joined:
    Oct 5, 2010
    Messages:
    988
    Likes Received:
    21
    That's because it's in the AA setting pull down.

    Antialiasing Mode - 'Override any application setting'
    Antialiasing Setting -'8xS [Combined: 1x2 SS + 4x MS]'
     
  9. Thepharcyde

    Thepharcyde Registered

    Joined:
    Mar 8, 2014
    Messages:
    112
    Likes Received:
    19
    Since being able to clamp the negative LOD bias with a Nvidia Tweak, that and RF2 660 the gfx are superb. Zero jaggies using RF2 own AA and HDR.
     
  10. wpthayer

    wpthayer Registered

    Joined:
    Jan 11, 2012
    Messages:
    93
    Likes Received:
    3
    Good Tip for me...... Looks good and better FPS Thanks for posting ;)
     
  11. Paul_Ceglia

    Paul_Ceglia Registered

    Joined:
    Jan 14, 2012
    Messages:
    676
    Likes Received:
    13
    sorry I meant setting, I have a **** ton of options none of which state the above, should i juist use this

    [​IMG]
     
  12. ForthRight

    ForthRight Registered

    Joined:
    Jan 12, 2012
    Messages:
    231
    Likes Received:
    4
    I'm not sure why you don't have the setting. Maybe on older cards you wouldn't get that option (possibly?) but you have a 780 so it should be there.

    The option in your picture is not the same and probably won't bring any benefit.

    I've attached a picture of the setting,

    View attachment 12772
     
  13. Paul_Ceglia

    Paul_Ceglia Registered

    Joined:
    Jan 14, 2012
    Messages:
    676
    Likes Received:
    13
    Odd it is, thank you for your input. I do not have that option. If I make a profile in the Nvidia control panel does it affect what is set in inspector are they tied together? I have the latest driver as well are you using a different driver or does that even matter? I am noob with gpu settings, in the past I would just go with it but now it seems you can't with rf2.
     
    Last edited by a moderator: May 18, 2014
  14. ForthRight

    ForthRight Registered

    Joined:
    Jan 12, 2012
    Messages:
    231
    Likes Received:
    4
    Nvidia Control Panel and Inspector are linked, so if you change a setting in one it will change the same setting in the other... at least that's how it works with the 'Global Settings', I assume it is the same for specific game profiles but I'm not certain.

    I'm using the latest Beta drivers, but I doubt these AA settings have just been added - I think they've been there for a while (I just never tested them before).

    I'm really not sure what to suggest to get them to appear. You could check if the AA setting is there in Global Settings page of Inspector (the page you get before selecting a specific game from the pull-down menu), other than that I'm a bit lost.
     
  15. Marc Collins

    Marc Collins Registered

    Joined:
    Jan 11, 2012
    Messages:
    3,159
    Likes Received:
    162
    What is this Nvidia Tweak you are referring to? Clamp setting doesn't work in current driver, control panel or NVidia Inspector as far as I know.
     
  16. ForthRight

    ForthRight Registered

    Joined:
    Jan 12, 2012
    Messages:
    231
    Likes Received:
    4
    Someone made a DLL file which you could put into the rFactor 2 'Core' folder and it would force the Clamp setting to do something to smooth out the jagged white lines etc. This isn't really needed now as we have the 'Texture Sharpening' setting in the PLR file - I think they do the same thing.
     
  17. Paul_Ceglia

    Paul_Ceglia Registered

    Joined:
    Jan 14, 2012
    Messages:
    676
    Likes Received:
    13
    Ok thanks I will keep an eye on it maybe it will show up one day

    Sent from my PG86100 using Tapatalk
     
  18. Magus

    Magus Registered

    Joined:
    Jun 27, 2012
    Messages:
    863
    Likes Received:
    557
    ForthRight, I just want to say a BIG thank you for this as I am now able to play with URD's T5 mod as well as the Apex GT3 mod without suffering erratic drops in FPS. Really does work a treat. :)
     
  19. DurgeDriven

    DurgeDriven Banned

    Joined:
    Mar 20, 2012
    Messages:
    6,320
    Likes Received:
    43


    I dont think it is that mate, depends on your OS , video card/ driver combo ..maybe ?

    ie: Others used beta never had it.
    .
    Latest beta driver as I said in other thread it screwed all my saved profiles and turned Inspector into Gibberish.

    First time I have ever ever have that happen.

    So blamed latest beta driver.

    Tried 3 times clean install does the same ..........stuffs NVi ........ then installing back last WHQL it was still stuffed.

    So I just ran a backup image back to C took 3 minutes ...forgot about new beta then ........


    I am, sure there is easy fixed logic to it but I could not be bothered looking
     
  20. ForthRight

    ForthRight Registered

    Joined:
    Jan 12, 2012
    Messages:
    231
    Likes Received:
    4
    No problem, I'm glad it helped. :)

    I'm not sure how this setting works exactly, but it definitely makes the game look a lot better than using the basic AA settings, yet it doesn't have quite the big drop in framerate that you'd get with 4x SparseGrid.
     

Share This Page