KNOWN Wheel will not calibrate since build update

Hi

This is the first time my wheel has been incompatible with rf2

( bodnar wheel )

Please could some one at ISI let me know if this hardware is no longer supported

Thanks

 

Is it running 1/2 out of synch?
Right after I updated, this happened.
I had to restart rF2 twice, then I noticed that my controller setup was set with a 10% deadzone.
Set the deadzone back to 0% ,restarted then all was fine again.

 

Hiya jim

No it will not calibrate (it was fine on previous builds) did fresh install

 

It won't calibrate in the driver for the wheel or anywhere (sim)?

 

Hiya jim

The wheel is perfect in iracing & in win7 calerbration etc. was fine in rf2 before new build,

I'm starting to think its the dreaded max number of controllers thing like in rf1

Rf2 is unusable for me now just like rf1, starting to wish I never bothered with it in the first place

 

Everything seems to affect you... Sorry for the bad luck there, Adrian. I hadn't heard of this before and you're the only report. I've let them know about you.

 

Nothing should have changed in regards to Windows 7 (we did have to disable some stuff for Win8). The max numbers of controllers is 6, and that should actually work now. How many controllers do you have plugged in?

 

Hiya

Thanks for the responses, I have a stack of stuff plugged in, not sure which count as controllers (rf1 is a no no due to max number Of controllers I think, now same problem with rf2 on this build )

Sli pro display (using buttons connected to this)
Peddals ( custom using Derek spere circuit board )
Bondar wheel ( works fine in win7 & iracing & prior rf2 builds but not this build)
4dof Motion ( using simexperience interface x1 USB plugged in)
Headphones ( 5.1 plugs into sound output jacks but plugs into USB for power & volume detection )

Calibration was quick & easy on all prior builds

I sent a short vid into rfactor support of what happens
I've tried deleting all the controller profiles in the rf2 folder as well as trying to calibrate from each one

I did a complete fresh install of rf2 when the new build came out

 

The number of controllers should be the same as what comes up in the Control Panel -> Game Controllers.

Could you add the command-line "+trace=2", run once and quit out, then give us the resulting file (UserData/Log/trace.txt)?

 

hiya Terence

yes I will do that no problem, where do I add that text please?

-is it right click on the rf2 shortcut & add it on to the end of the target text ????

 

sorted it, Trace file :



TRACE LEVEL = 2
tracelog.cpp 139: Command line: "+path=".." +hash=####HIDDEN#### +trace=2"
main.cpp 235: FPU=0x0009001f
game.cpp 1706: Entered Game::Enter()
osman.cpp 727: Entered OSMan::Enter()
plrfile.cpp 2923: Entered PlayerFile::Enter()
plrfile.cpp 2063: Attempting to save to f:\Program Files (x86)\rFactor2\UserData\player\player.TMP
plrfile.cpp 2096: Retcode: 0 for renaming to f:\Program Files (x86)\rFactor2\UserData\player\player.PLR
hwinput.cpp 7589: Entered HWInput::Enter()
hwinput.cpp 7590: HKL=0x08090809
vidman.cpp 1770: Entered VidMan::Enter()
specialfx.cp 3570: Entered SpecialFX::Enter()
dynman.cpp 728: Entered DynMan::Enter()
sound.cpp 1312: Entered Sound::Enter()
onscreen.cpp 3519: Entered OnScreen::Enter()
game.cpp 1761: Entered Game::Setup()
hwinput.cpp 7677: Entered HWInput::Setup()
hwinput.cpp 7660: DirectInput enumerated 4 game controller(s)
hwinput.cpp 1446: Controller was enumerated ...
hwinput.cpp 1590: ... and successfully initialized
hwinput.cpp 1446: Controller was enumerated ...
hwinput.cpp 1590: ... and successfully initialized
hwinput.cpp 1446: Controller was enumerated ...
hwinput.cpp 1590: ... and successfully initialized
hwinput.cpp 1446: Controller was enumerated ...
hwinput.cpp 1590: ... and successfully initialized
options.cpp 4823: Entered Options::Setup()
O_AppObj.cpp 2808: Initiate options object creation
O_OSC.cpp 2945: Entered Options_OSC_Reader::ReadOSC()
vidman.cpp 1325: Trying to Play Bink File: f:\Program Files (x86)\rFactor2\Installed\UIData\ISILogo.bik
MovieMan.cpp 120: Error locating video file F:\PROGRAM FILES (X86)\RFACTOR2\INSTALLED\UIDATA\ISILOGO.BIK
MovieMan.cpp 120: Error locating video file F:\PROGRAM FILES (X86)\RFACTOR2\INSTALLED\UIDATA\ISILOGO.BIK
vidman.cpp 1325: Trying to Play Bink File: f:\Program Files (x86)\rFactor2\Installed\UIData\ALL_TRACKS_AND_CARS_10.bik
MovieMan.cpp 120: Error locating video file F:\PROGRAM FILES (X86)\RFACTOR2\INSTALLED\UIDATA\ALL_TRACKS_AND_CARS_10.BIK
MovieMan.cpp 120: Error locating video file F:\PROGRAM FILES (X86)\RFACTOR2\INSTALLED\UIDATA\ALL_TRACKS_AND_CARS_10.BIK
vidman.cpp 1325: Trying to Play Bink File: f:\Program Files (x86)\rFactor2\Installed\UIData\PreGame.avi
MovieMan.cpp 130: Error opening AVI file F:\PROGRAM FILES (X86)\RFACTOR2\INSTALLED\UIDATA\PREGAME.AVI
MovieMan.cpp 130: Error opening AVI file F:\PROGRAM FILES (X86)\RFACTOR2\INSTALLED\UIDATA\PREGAME.AVI
tire_manager 1370: Non-existent tire brand ""
tire_manager 1370: Non-existent tire brand ""
O_OSC.cpp 3125: Exited Options_OSC_Reader::ReadOSC()
O_AppObj.cpp 2900: Options object creation successful
specialfx.cp 3576: Entered SpecialFX::Setup()
steward.cpp 8321: Entered Steward::Setup()
dynman.cpp 768: Entered DynMan::Setup()
sound.cpp 1328: Entered Sound::Setup()
render.cpp 1647: Entered Render::Setup()
onscreen.cpp 3525: Entered OnScreen::Setup()
plrfile.cpp 2963: Entered PlayerFile::Setup()
plrfile.cpp 2063: Attempting to save to f:\Program Files (x86)\rFactor2\UserData\player\player.TMP
plrfile.cpp 2096: Retcode: 0 for renaming to f:\Program Files (x86)\rFactor2\UserData\player\player.PLR
game.cpp 1798: Entered Game::Init()
game.cpp 1802: got past replayman init
vidman.cpp 2013: Entered VidMan::Init()
ai_db.cpp 3438: Entered AIDatabase::Init()
steward.cpp 8338: Entered Steward::Init()
steward.cpp 2496: Could not find glow "STARTGLOW"
steward.cpp 2496: Could not find glow "PITGLOWIN"
steward.cpp 2496: Could not find glow "PITGLOWOUT"
hwinput.cpp 7726: Entered HWInput::Init()
specialfx.cp 3682: Entered SpecialFX::Init()
dynman.cpp 779: Entered DynMan::Init()
util.cpp 1076: Unable to adjust texture for material: wcwindow_104, tex0=Misc\window.dds, tex1=clio_pc_Skinwindow.dds, tex2=wcwindow_104.dds
util.cpp 1076: Unable to adjust texture for material: wcwindshieldin_104, tex0=Misc\windshieldin.dds, tex1=clio_pc_Skinwindshieldin.dds, tex2=wcwindshieldin_104.dds
util.cpp 1076: Unable to adjust texture for material: wcwindshieldout_104, tex0=Misc\windshieldout.dds, tex1=clio_pc_Skinwindshieldout.dds, tex2=wcwindshieldout_104.dds
util.cpp 1076: Unable to adjust texture for material: wcdriver_104, tex0=Misc\driver.dds, tex1=clio_pc_Skindriver.dds, tex2=wcdriver_104.dds
util.cpp 1076: Unable to adjust texture for material: wcextra0_104, tex0=Misc\extra0.dds, tex1=clio_pc_Skinextra0.dds, tex2=wcextra0_104.dds
setup.cpp 2816: Could not find Malaysian_GP.race.svm
setup.cpp 2816: Could not find Malaysian_GP.svm
pitcrew.cpp 341: CUBE error loading animation file HOLDLEFT.ANM: Error locating animation file HOLDLEFT.ANM
pitcrew.cpp 341: CUBE error loading animation file HOLDRIGHT.ANM: Error locating animation file HOLDRIGHT.ANM
util.cpp 1076: Unable to adjust texture for material: wcdriver_000, tex0=Misc\driver.dds, tex1=FISIR_2012_03driver.DDS, tex2=wcdriver_000.dds
util.cpp 1076: Unable to adjust texture for material: wcdriver_001, tex0=Misc\driver.dds, tex1=FISIR_201

 

OK, I was looking for the successful initialization of controllers. It looks like there were 4, is that the same number you see in the Control Panel -> Game Controllers?

 

Terence, a big thanks for your help here,

I think this is what your after:




( The dsd item is pedals )

 

Bump )-:

 

[MENTION=1111]Terence Groening[/MENTION]; USB hubs?

 

hiya Tim

thanks for reply, does he mean powered external hub? -I use just one ( think the sli pro apparently prefers more power )

does he think this is being counted too ? shall i try without it ?

is that the thing in devices showing as 4 port usb hub ( but there is x2 ),

not sure if im on the right track here

 

tried it without the powered hub, still no go, also tried it after disabling the 4 port hubs & still no good )-:

 

No I'm not looking for generic hardware. Just press the Windows Start button, type "Game Controllers" into the search box and it should bring it up. It should have a list of game controllers. The title of the box should be "Game Controllers". For example, my current one at work has the following list:

ClubSport Wheel
Clubsport Pedals

 

It's called 'set up usb controllers' in my W764 control panel search, when you click it, the window it opens is Game Controllers. I guess you can thank Microsoft for making things confusing there.

 

Type joy.cpl and press enter into the start menu search box thing I think?

Sent from my Nexus 4 using Tapatalk