Hey, im using 3 monitors alias triple screen setup with rf2. I have the problem that both mirrors are not useable, they only help me when i park in reverse, they show me nice stretched details of the road. On the new DLCs the rear view camera is in the middle of both monitors. So what can help me here? i know there is a way to edit some config files? Is this the only way?
Do you have Multiview selected in the rF2 Launcher's Video Settings? With multiview and the correct resolution selected you then use the in-game triple screen setup app to input the monitor dimensions, distance from eyes and side monitor angle.
And use the modifiers with the seat movement commands to move/adjust the mirrors (e.g. CTRL SEATFWD button will move the left mirror left or right).
Ah ok, i didnt know the CTRL+ Triples/Tires Setting and the mirror changes So my last question: What are these values in the trible ingame setting? They have 0.xx settings. My settings for my 3x27" (FullHD) monitor: I am 100cm away from them, they are each 63cm wide. What is this "Wide Screen width" in the options? 63cm x 3? At the moment i have the value at 1800. And the Rear camera still sucks when its in the middle of 2 monitors
All measurements are in metres. Come on USA, get with the metric program. So if all your monitors are the same make sure the "All" is shown up top. If you click All, it will change so you can alter the measurements of each monitor. This picture is my setting I have 3x24" (23.5 actually) Dell monitors. Start with the width: wth:0.528 My viewable width of one monitor is 528mm (millimetres) which is 0.528 of a metre. Use the + and - to edit. If you then click the link symbol it should give you the proper viewable height. 297mm, or 0.297 metres. eye: 0.650. My eyes are 0.650 metres from the middle screen. My monitors have a nice slim 6mm bezel, gap: 0.006 The side monitors are at 60 degrees to the middle one, ang: 59.999 No saving, just hit the x, top right to finish. Super simple. All that info is saved in the Config_DX11.ini found in the UserData folder. SubViews=2 UseSubViewParams=1 WorkaroundFlags=0 ViewParams=(0.528, 0.297, 0.650, 60.000, 0.006) // screen width (m), screen height (m), eye distance (m), side angle (deg), bezel gap (m) LeftView=(0.528, 0.297, 0.650, 60.000, 0.006) RightView=(0.528, 0.297, 0.650, 60.000, 0.006)
