Tire sinking

Rastas

Rastas

Registered
Hi guys,small issue here,the tires are sinking a bit,any parameter in tgm can solve this?
Thanks in advance :)
GRAB_381.JPG
 
Go to TGM-[Realtime]-SizeMultiplier=(1,1), these two values change the dimensions of the tyre.
 
Are the tyres in tuning-options-garage also sink in to the ground?
Have you tried a different tbc?
I have the same problem in tuning-garage but not in track.
I hope an expert can help you better than me man.
 
In the garage is good,the problem is only in track,diferents tbc and tgms,ones less others more.
The tyres are 265/35R18 Bridgestone Potenza RE-01R
 
Bridgestone Potenza's have a long history of sinking into asphalt. ESPECIALLY those that are only 265mm wide... (sorry, please accept my appoligies for making fun of that.) I'd try Iagg's suggestion, fill the tires to max pressure and look again.
 
The best results you get, when the 3D Objects of tires and rims exactly match the sizes of the tgm/tire and the size values for the tires and rims that are written in the tbc.
 
hi i make a new car mod based on skipbarber and now my wheels appears in the skipbarber wheels position and its wrong because my car its bigger and longer than skipbarber. how/where could i change these wrongs values? or how coud i solve this problem? thanks
 
Open the HDV and search the lines LeftWheelBase= and RightWheelBase= and enter your measurements there, that should help.
And you should also adapt the values for FrontWheelTrack and RearWheelTrack.
 
Bernd said:
In devmode, you can show it with pressing Ctrl + U when you are on the track, if i remember it right and if it is that what you mean.
Click to expand...
Yep,is that,it shows more info,like engine power,tire curve slip etc :)
Also if you press ctrl+d it shows aero,suspencion values etc.
 
You must log in or register to reply here.
Back
Top