Throttle Issue with STC2000

Discussion in 'Car Modding' started by memoNo1, Apr 1, 2024.

  1. memoNo1

    memoNo1 Registered

    Joined:
    Apr 13, 2019
    Messages:
    1,914
    Likes Received:
    2,725
    Hello everyone.
    I have a problem with the STC2000 mod.
    When I start the engine and shift into first gear, the car accelerates a little on its own, even though I don't press the pedal at all.
    Everything works fine when idling.
    It's not the hardware.
    What could it be?
    If you are seriously interested in helping, write to me via PM.
    Then you can see for yourself.

    [​IMG]
     
  2. Lazza

    Lazza Registered

    Joined:
    Oct 5, 2010
    Messages:
    12,379
    Likes Received:
    6,599
    Assuming you're using autoclutch, try manually holding a clutch in for ~5 seconds before putting it in gear. See if that stops it happening.

    The engine running at idle in Neutral is still connected to the gearbox (without the clutch being involved) and knocking it into gear before it (input shaft at least - not too sure which rF2 parameter controls that off the top of my head) slows down will provide enough momentum to impart some movement.

    So check clutch engage rates, clutch inertia, gear ratios, things along those lines.
     
  3. memoNo1

    memoNo1 Registered

    Joined:
    Apr 13, 2019
    Messages:
    1,914
    Likes Received:
    2,725
    Ok i give it a try.
    Thx
     
  4. redapg

    redapg Registered

    Joined:
    Jan 16, 2012
    Messages:
    3,998
    Likes Received:
    2,872
    Just as an Information: my Norton Anti Virus throws me a Warning about a Malicious Attack, when i click on the Screenshot and the pic-upload.de Site opens.
    That's not very trustworthy :D
     
  5. ManfredK2_new

    ManfredK2_new Registered

    Joined:
    Feb 19, 2024
    Messages:
    51
    Likes Received:
    80
    i am using a manual clutch and dont see any throttle input on my dashboard when going into 1st gear. rpm at neutral are around 1600, when 1st gear engaged 1900.
     
  6. redapg

    redapg Registered

    Joined:
    Jan 16, 2012
    Messages:
    3,998
    Likes Received:
    2,872
    I did check it already and did send an Update rfcmp to @memoNo1
    There've been some "wrong" Lines in the Engine.ini, which seems to be a manually edited One, which is no good Idea in some Cases.
     
    Corti, memoNo1 and ManfredK2_new like this.
  7. memoNo1

    memoNo1 Registered

    Joined:
    Apr 13, 2019
    Messages:
    1,914
    Likes Received:
    2,725
  8. memoNo1

    memoNo1 Registered

    Joined:
    Apr 13, 2019
    Messages:
    1,914
    Likes Received:
    2,725
    Very strange.
    I never use auto clutch or other aids of this kind.
     
  9. Lazza

    Lazza Registered

    Joined:
    Oct 5, 2010
    Messages:
    12,379
    Likes Received:
    6,599
    Oops, sorry @memoNo1 - I replied to your description, I couldn't see the image. Actual throttle input (probably automated, maybe auto blip or something) - that's entirely different to what I described :p
     
    redapg and memoNo1 like this.
  10. memoNo1

    memoNo1 Registered

    Joined:
    Apr 13, 2019
    Messages:
    1,914
    Likes Received:
    2,725
    Works perfect!
    Thx!
     
  11. memoNo1

    memoNo1 Registered

    Joined:
    Apr 13, 2019
    Messages:
    1,914
    Likes Received:
    2,725
    What exactly was the problem?
     
  12. Corti

    Corti Registered

    Joined:
    Sep 29, 2014
    Messages:
    1,360
    Likes Received:
    2,509
    great job guys!
     
    memoNo1 likes this.
  13. redapg

    redapg Registered

    Joined:
    Jan 16, 2012
    Messages:
    3,998
    Likes Received:
    2,872
    I think the main Reason have been these 2 Lines, that didn't make Sense at all:
    EngineBrakingLimit=(1, 1, 1, 1, 1, 1, 1, 1, 1)
    EngineBrakingGear0Limit=(0, 0, 0, 0, 0, 0, 0, 0, 0)
    and i also added a missing Line for the IdleRPMLogic=..., but that didn't have an Effect.
    Normally the whole Engine should be redone with the Physics Spreadsheet, because, as said, i think that it was edited by Hand.
    But in the Moment when the reported Problem was solved, i decided to stop testing and investigating. :)
     
    davehenrie, Corti and memoNo1 like this.
  14. memoNo1

    memoNo1 Registered

    Joined:
    Apr 13, 2019
    Messages:
    1,914
    Likes Received:
    2,725
    To be honest, I didn't understand anything.:D
    Thanks anyway.
     
  15. redapg

    redapg Registered

    Joined:
    Jan 16, 2012
    Messages:
    3,998
    Likes Received:
    2,872
    Don't care, as long as it works now.... :)
     
    memoNo1 likes this.
  16. redapg

    redapg Registered

    Joined:
    Jan 16, 2012
    Messages:
    3,998
    Likes Received:
    2,872
    I forgot.... if someone is interested, here is the Dropbox Link to download the Update rfcmp:
    Download
     
    memoNo1, Corti and davehenrie like this.
  17. Raintyre

    Raintyre Registered

    Joined:
    Jul 28, 2013
    Messages:
    228
    Likes Received:
    187
    This car includes 'antilag' feature, which is made by means of RF2 engine brake config. If the engine brake config is modified maybe the antilag will not work, or malfunction. ;)
     
  18. redapg

    redapg Registered

    Joined:
    Jan 16, 2012
    Messages:
    3,998
    Likes Received:
    2,872
    Then it was probably not made properly, if it raises the Idle Rpm when a Gear gets engaged. (My Opinion) :)
    And how it is now, i doubt that it will cause any Malfunction.
     

Share This Page