Tatuus F3 T318 - Rear Suspension Position?

The Tatuus F3 T318 has several "Rear Suspension Position" options on the "Chassis" tab in setup.
Can anyone explain the differences between them?

AD13 RC=58.48
AD14 RC=19.39
AD23 RC=63.4
AD24 RC=24.06
AE13 RC=75.47
AE14 RC=19.39
AE23 RC=80.53
AE24 RC=24.06

BD13 RC=61.47
BD14 RC=22.52
BD23 RC=66.41
BD24 RC=27.22
BE13 RC=78.27
BE14 RC=39.67
BE23 RC=83.39
BE24 RC=44.55
BF13 RC=94.66
BF14 RC=56.38
BF23 RC=99.94
BF24 RC=27.22

CE13 RC=81.08
CE14 RC=42.62
CE23 RC=86.22
CE24 RC=30.33
CF13 RC=97.33
CF14 RC=59.19
CF23 RC=102.63
CF24 RC=64.26

 

http://www.csai.aci.it/fileadmin/documenti/workshop-manual.PDF
Page 55

 

Thank you very much!!!

 

What about the F4-T014?

 

You can try stumbling your way through this..May have what you are looking for, maybe not .I don't have time ATM so not sure if it helps.
http://usf4.com/wp-content/uploads/2015/08/Mygale-M14-F4-Ford-User-Manual-V1.4-MSA-Formula4.pdf

 

This manual seems only apply to "FA010", none of the Roll center/Anti-squat/Anti-lift value matches other tatuus cars (just compare those table numbers with in-game RC value from setup panel).
Also just checked the other F4 manual, which belongs to a different F4 than Tatuus, and doesn't have info about Roll center/Anti-squat/Anti-lift either.
Nevertheless, thanks for the info & help!

 

Are you sure? Its a different car, the positions dont match the ingame settings exactly and the RC height per position is different too.

 

@Risto Kappet it shows logic how those connection locations are named, same logic works on 318.
Finally it will still go by feeling, you'll decide which position by testing feel of behaviour.

 

Were you able to find a workshop manual for the F4-T014, similar to the one provided here for the FA010 and the Mygale?