Skidmarks are 70% of the size of the tire width?

Discussion in 'Car Modding' started by Spitfire1, Oct 9, 2020.

  1. Spitfire1

    Spitfire1 Registered

    Joined:
    Dec 6, 2019
    Messages:
    144
    Likes Received:
    71
    Hey guys i used the online tool to change TGM size from 285-35 R19X10 to 275-35 R18X9.5 and it seems the skidmarks are too small compared to the 275 mm width of tires. Is there a parameter for air pressure and volume that i forgot or maybe camber is set wrong?

    Any ideas?
    [​IMG]
    [​IMG]

    EDIT: ok i checked the 3d model and the 3d model is 292 mm and the tire file says 275 mm. But it seems despite that the skidmark is way smaller. Maybe skidmarks are never the full width of the tire? Surely there is less like 265 mm because it curves up at both sides which shaves off millimeters but how many?

    Is the size multiplier in the tgm multiplying the numbers in the tbc? so if i have 0.275 in rear in the tbc and (1,1) multiplier in tgm the result will be 0.275 in game for me as a player?
     
    Last edited: Oct 9, 2020
  2. Lazza

    Lazza Registered

    Joined:
    Oct 5, 2010
    Messages:
    12,346
    Likes Received:
    6,572
    I think the TBC width value determines the skid width alone.
     
    Chabba Ranks likes this.
  3. Emery

    Emery Registered

    Joined:
    Oct 24, 2010
    Messages:
    3,035
    Likes Received:
    1,654
    Ditto.
     
    Chabba Ranks likes this.
  4. Spitfire1

    Spitfire1 Registered

    Joined:
    Dec 6, 2019
    Messages:
    144
    Likes Received:
    71
    It doesn't seem to. 0.295 is same width as 0.275 i just checked.
     
    Emery likes this.
  5. Adamcas87

    Adamcas87 Registered

    Joined:
    Jul 5, 2020
    Messages:
    47
    Likes Received:
    11
    Hahahahaha....skidmarks
     
  6. Spitfire1

    Spitfire1 Registered

    Joined:
    Dec 6, 2019
    Messages:
    144
    Likes Received:
    71

Share This Page