Rfactor2 The VR thread -settings & tips

Mark Fuller said:
Checked mine and found to be Gen 2 :-(

Anyone know where I might find a socket 1150 MOBO with Gen 3 PCIe? Have had a search, but cannot locate anything in stock. Or, should I bite the bullet and get a newer board/CPU combo. This would be for a Geforce GTX980 Ti
Click to expand...

Go for new cpu/mobo/ram
 
2ndLastJedi said:
And GPU ;)
Click to expand...


980ti still packs a lot of punch ,
ti versions are good gpu’s
& 980ti is better than most 10 series
So think he should put monies into mobo etc

I went from 1080. To 1080ti & it was like a different card ,
Similar experience with previous gens

If there’s a 11 series ( or 20xx ) then I’ll not really be interested until the Ti version surfaces , usually about 10 months after
 
Adrianstealth said:
980ti still packs a lot of punch ,
ti versions are good gpu’s
& 980ti is better than most 10 series
So think he should put monies into mobo etc

I went from 1080. To 1080ti & it was like a different card ,
Similar experience with previous gens

If there’s a 11 series ( or 20xx ) then I’ll not really be interested until the Ti version surfaces , usually about 10 months after
Click to expand...
lol , it was a different card ;)
Yeah,im waiting for next Ti, on 7nm !
 
I do and that happened yesterday though I didn't record it and did the video specially. There were a lot more spins, it was like being stationary in a clothes dryer :confused:
 
Adrianstealth said:
Every time I update them with a pic host they expire & disapear
I’ll find a new one that’s hopefully more permanent
Click to expand...
Upload the pictures here, like this
Capture.JPG
 
Mark Fuller said:
What would be the noticeable effect of having Gen 2 and how much improvement does Gen 3 provide?
Click to expand...

For my system (X79 board with 3930K @ 4.7Ghz running 980Ti) I'd say it is pretty significant that it is very noticeable. I don't have an exact figure as I made the switch to Gen3 so long ago but I do recall installing W10 (when it was 1st released) and then wondering why my performance in rF2 & R3E had become unplayable. After going forwards and backwards with installs of Windows I suddenly remembered I had not run the Gen3 patch for my board that I need to do each time I update my GPU drivers. @Ari Antero would probably be able to give you a % in FPS difference as I know he has run a number of tests between Gen2 & 3 PCI-e. All I can tell you is that it is significant.
 
Seven Smiles said:
I do and that happened yesterday though I didn't record it and did the video specially. There were a lot more spins, it was like being stationary in a clothes dryer :confused:
Click to expand...
OK, so you know.
How did it felt last you had a roll over with a car?
Looking at LTH on a fixed flat screen is silly, but in VR it is as close as beeing there. You roll with the car and the horizon, well stays as the horizon. When the roll stops, if you are upside down, the horizon is still there for you, same as if you lean you head, the horizon stays as the horizon. A camera does not have a very elaborate inner ear system to tell the brain what he his supposed to see, well some camera have a stabiliser, but a game does not, that is if it does not have LTH.
 
Anyone else noticed that the world scaling is off with the latest update? It's looks like the game is ignoring the steam VR IPD setting, so my race car now looks about 4 feet wide. Also, the loading screens are now projected at some comically low-resolution onto the inside of what looks like a cylinder, with the progress bar a little circle at the top. Looks awful.

And the game is *still* de-selecting the SteamVR 'enable dashboard' option for no reason at all, which is a pain in the backside.
 
mr_belowski said:
Anyone else noticed that the world scaling is off with the latest update? It's looks like the game is ignoring the steam VR IPD setting, so my race car now looks about 4 feet wide. Also, the loading screens are now projected at some comically low-resolution onto the inside of what looks like a cylinder, with the progress bar a little circle at the top. Looks awful.
Click to expand...

I've not got that at all, not seen it reported either so if it was a widespread issue it would've been known for awhile, which headset are you using?
 
mr_belowski said:
Anyone else noticed that the world scaling is off with the latest update? It's looks like the game is ignoring the steam VR IPD setting, so my race car now looks about 4 feet wide. Also, the loading screens are now projected at some comically low-resolution onto the inside of what looks like a cylinder, with the progress bar a little circle at the top. Looks awful.

And the game is *still* de-selecting the SteamVR 'enable dashboard' option for no reason at all, which is a pain in the backside.
Click to expand...
I get this happen some times only if i make an AA or resolution adjustment from within the game and hit apply ( The cylinder load screen I mean) .
 
Cote Dazur said:
OK, so you know.
How did it felt last you had a roll over with a car?
Looking at LTH on a fixed flat screen is silly, but in VR it is as close as beeing there. You roll with the car and the horizon, well stays as the horizon. When the roll stops, if you are upside down, the horizon is still there for you, same as if you lean you head, the horizon stays as the horizon. A camera does not have a very elaborate inner ear system to tell the brain what he his supposed to see, well some camera have a stabiliser, but a game does not, that is if it does not have LTH.
Click to expand...
With AC's LTH the car spins around you if you roll or if you drive on steep banking like old Monza the car rotates weirdly around you .
 
You must log in or register to reply here.
Back
Top