[REL] rFactor2 Log Analyzer ver. 2. With offline and league Championship Manager

That happens because when there is so much races, that table goes out of main "div" area. I don't know why one line is transparent there, it should have white bg color. I will look, but probably I will not be able to change that with css. What I need to do, is some solution when table becomes so big. Maybe I'll manage to add overflow scrollbars and contain table to only main area in some future update.
 
Hi Nibo, I've a question: how is calculated the fuel % of lap? I belived it was fuel in tank at the end lap recorded. But I see that starting with 50L , with 100L of max capability of the car, with a consumption of about 1.90L in lap, the fuel reported was 46.3%. Not near 48% like espected from me. I hope I was clear!
Thanks for your answer ;)
 
Yes, "fuel" column is fuel % at the end of the that lap. It is not calculated by r2la, but is just the value taken from xml. "Fuel spent" column on the "Stints" tab is calculated as previous lap "fuel" minus this lap "fuel" (in %). I don't know why you don't have expected values. Make sure that you have done just one out lap (if it is Practice/Qual) and then fast lap(s) and no lap times were removed because of track cutting.
 
Alek said:
Ok. But what does the percentage refer to? I was thinking about the tank capacity. I'm wrong?
Click to expand...
No, you're not wrong.
I did a race at Sebring.
Started with a full tank, 120 litres.
Averaged 3.5% of 120 lites/lap = 4.2 +/- litres a lap
Here is my garage setup for fuel:
FuelSetting=120//120L (31laps)
NumPitstopsSetting=1//1
Pitstop1Setting=40//+40L (10laps)

Here is the truncated fuel read out from rF2LA.
End of first lap 3.5 % used
28 laps x 4.2 litres =117.6 litres

I reduced my pitstop fuel to 32 litres from 40.
So I left the pits with close to 35 litres in the tank which is just over a quarter of a tank, as shown 27.5%.
fuel.JPG

I hope that was all clear as mud.

Oh yeah, I won the race as I was the only one who didn't have a crash. :D
 
After you create a championship, press "+" button on championship page to add a race, enter a race track name, then select created race and press "Assign race result", select your race log result in selector.
 
What are you doing and what exactly does not work? Did it work before? What browser are you using? (IE is not supported).
 
There should be modal pop-up with input field for race name. I think there is something with your browser setup (maybe something blocks pop-up). Try another browser (I tested on Vivaldi, Opera, Maxthon, Waterfox).
 
If you selected DEDI version at r2la first start, then you need to be signed in as admin to see control buttons.
If you didn't select DEDI version, then you don't need to sign in, you are already an admin always.

But since LITTLEBLACKO_ says that he presses "+" button, then its visible and he is already admin.
 
You must log in or register to reply here.
Back
Top