RF2 Physics Spreadsheet

Discussion in 'Car Modding' started by whitmore, Apr 12, 2019.

  1. whitmore

    whitmore Registered

    Joined:
    Feb 26, 2012
    Messages:
    550
    Likes Received:
    140
    Where would I find these values for an existing mod to input into the Suspension Geometry sheet. I have looked through the HDV file but have not found the values. Susp Values.JPG
     
  2. Bernd

    Bernd Registered

    Joined:
    Jul 9, 2013
    Messages:
    1,453
    Likes Received:
    686
    The pushrod points can be found in the hdv, in the tire sections.
    All other points can be found in the pm file, if the mod still has one.
    Taking the suspension points from the chassis.ini is possible for some of the points only.
     
  3. whitmore

    whitmore Registered

    Joined:
    Feb 26, 2012
    Messages:
    550
    Likes Received:
    140
    Thanks Bernd no PM file in the mod.
     
  4. Jokeri

    Jokeri Registered

    Joined:
    May 17, 2014
    Messages:
    186
    Likes Received:
    27
    You need to calculate suspension points from the inertia box center if memory serves me correctly
     
  5. Bernd

    Bernd Registered

    Joined:
    Jul 9, 2013
    Messages:
    1,453
    Likes Received:
    686
    If the mod you are using is a conversion from rf1, you can use the rf1 hdv and pm file.
    And you can use the tool, that extracts the needed values from these files, that you can paste them into the physics spreadsheet, that is on the website of Chris (redapg):
    http://meetme.bplaced.net/rF2_onlineTools/
     

Share This Page