[REL] Pocono Raceway

machine

machine

Registered
Pocono Raceway is a 2.5 mile "Roval" oval. The oval with 3 different corners.
It is a conversion from an original scratch built track for Stock Car Evolution. (rFactor 1)
The racing surface has been reworked, adding support for Realroad.
The AI works well here in the Stockcars. 100% works well.

This is a fill in track until a new 3PA track becomes available (Possibly up to 2 years)

v1.00 is first release.

Track can be raced at the following Leagues: (and others of course)
Australasian Racing
http://australasiaracing.com/
Sim HQ Motorsports
http://simhqmotorsports.com/index.php?/forum/78-scsr-stock-car-championships/
NEOBR
https://neobr-av.com/

For PICTURES, follow the STEAM LINK below.

Steam link: http://steamcommunity.com/sharedfiles/filedetails/?id=691833037
Mega: Link here (Preferred download)
Dropbox: https://www.dropbox.com/s/4uwb1twk42fbi29/Pocono_Oval_2016_v100.rfcmp
Setup: See setups folder link below for all my setups

This track was completed with help from Leonardo Nogueira (Box Race Brasil)
If you are from Brasil, See some links to Box Race Brasil here - http://simhqmotorsports.com/index.php?/topic/10564-stock-cars-fun-race-boxracebrasil/

Tracks by Machine
Daytona | Dover | Kansas | Michigan | New Hampshire | Phoenix | Pocono | Texas | Watkins Glen
Steam | Setups Folder
 
Last edited:
You did a beatifull job with this track, but I do have one question, though. When I tried the DW12 around here, I couldn't get it to stick in the corners, no matter how much wing I'd put into it with the speedway configuration.
 
I did about 5 laps and was able manage 43.4
Turn 1, just on 200mph (199-200)
Turn 2, just over 200mph (200-202)
Turn 3, 185 mph
Surprising turn 3 is the slowest, but it again shows the lowest banked turn generates the lowest grip.
The exact reason why most tracks I have done so far are under 1.0 grip.
Texas 0.9
Michigan 0.9
Pocono 0.95
Track grip is always (usually) set at 1.0, and will be updated to this once the Stockcar tyres are corrected.
 
Last edited by a moderator:
Machine (Garry), I was wondering if you would give me permission to convert this track (Pocono Raceway) over to Assetto Corsa? I will not allow any distribution without your consent. If you approve, I will, of course, credit you with the original development.

Thanks for your time,
Dennis
 
You must log in or register to reply here.
Back
Top