Is there a sucessfull sequencial shift mod or kit available. Something that is not visable externally.
http://www.ebay.com/itm/Sequential-...185019?hash=item2cc36bd4fb:g:ticAAOSwMNxXaZQa this is left visible but it seems pretty nice and simple. and cheap im thinking of getting one..
You might want to check out You Tube, there are a few easy mods to fix this. I use a few rubber bands, works great, costs pennies!
In terms of converting the H shifter into a sequential shifter - I too have seen some on-line projects for this. I was thinking of this: http://hiconverter.com Discussion thread on it from norgripracing.com - where the rubber band mods are mentioned too and a suggestion regarding using surgical tubing instead of rubber bands: http://www.nogripracing.com/forum/showthread.php?t=246263
Hi there, I don't know if someone already posted something like this (no search results) but I am quite happy about my little mod and I want to share it with you too... Needed parts: - 1 working g25 shifter - 1 working g27 shifter - tools and 1 hour of your life How to proceed: - Disassemble both shifter units. - Disconnect all the wires from the circuit board, do it carefully. - remove the bottom piece of the G27 shifter, don't touch the mechanical part, remove only the black wire coming out of the G27 (the one goes on wheel base). - Open the G25 shifter, remove the metal plate that goes under the knob to change shifting modes. Be careful as the sliding mechanism under it will want to pop up and the springs will come out. So hold that thing down and be ready to take that out (its two sliding pieces overlapping, hold them together when you take it out). You'll also need that switch. - Remove the G25 black cable as you did for the G27 shifter. Time to put it back: - Install those three parts (switch, then sliding mechanism, then the plate) into the G27 base. - mount the G25's cord and the G25 board and swap them into the G27 base. - Finally take the top half of the G25 and put it onto the G27 base after making all the connections, please don't forget the knob switch wires!!! The result: G27 base and H-shifter mechanism G25 sequential mechanism on top G25 wiring harness G25 top w/circuit board If you have some difficulties putting 5th and 6th gear, change the two screws securing G27 shifter stick on the top with 2 flatten screws to avoid screws hitting plastic and blocking gears. How it works? Works great, especially the sequential, you can switch on the fly to H and your G27 will see it You will also have an extra shifter with G25 mechanism and G27 board (but with G25 cable) for extra parts (you can sell them).
Thanks for that very detailed mod description. I don't think I'll go that far. So I guess that means you can't just plug a G25 shifter into a G27.
Exactly but you can go the easy way, buy a g25 shifter and put a g27 cable or mod the g25 cable to match the g27 plug!
