Json and wall....

Discussion in 'General Discussion' started by mixer61, Dec 25, 2020.

  1. mixer61

    mixer61 Registered

    Joined:
    Dec 26, 2011
    Messages:
    553
    Likes Received:
    149
    Which line of the json controller should be modified for shocks against walls (shock attenuation)?
    Thanks.
     
  2. Bozak

    Bozak Registered

    Joined:
    Nov 22, 2016
    Messages:
    70
    Likes Received:
    56
    "Jolt magnitude":-1.9,
    "Jolt magnitude#":"How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.",

    I have it at -1.9 to reduce the force of collision because it's too strong with DD wheel
     
  3. MileSeven

    MileSeven Registered

    Joined:
    Apr 1, 2014
    Messages:
    650
    Likes Received:
    244
    I tried a bit of testing of this JSON entry today with my SC2 Pro (set to 100%) and I honestly could not really discern much difference between -2, 0 and +2...

    i tested by driving fairly consistently into the same bit of wall at the same speed coming out of the pits on the Cadwell 3rd party track.

    Contrast this with the Overall Steering entry: -10000 gives the strongest ‘normal’ steering forces, 0 (from memory) dulls them to nothing and anything > 0 reverses the forces and makes the vehicle un-drivable....
     
    Herve_Versabeau likes this.

Share This Page