is there a way to assign F13-F24

Discussion in 'General Discussion' started by ThomasJohansen, Feb 24, 2021.

  1. ThomasJohansen

    ThomasJohansen Registered

    Joined:
    Dec 27, 2019
    Messages:
    347
    Likes Received:
    839
    is there a way to assign keyinputs F13 to F24 in rF2?
     
  2. ThomasJohansen

    ThomasJohansen Registered

    Joined:
    Dec 27, 2019
    Messages:
    347
    Likes Received:
    839
    solved it with https://sourceforge.net/projects/vjoy-controller/ and then first assigning F13 to F24 to special keys on my keyboard, and then bind them in Virtual controller to vjoy.
    Now when pressing F13 it sends a button1 press from vjoy controller. rF2 can spot that.
     
    Corti likes this.
  3. ThomasJohansen

    ThomasJohansen Registered

    Joined:
    Dec 27, 2019
    Messages:
    347
    Likes Received:
    839
    Almost done with my wheel, connected to simhub.
    Note to others, buy an Arduino micro Pro with usb instead of a nano, then you don't have to do this workaround with vjoy.

    Adjustable brightness LED buttons IMG_20210224_205123.jpg IMG_20210224_205404.jpg IMG_20210224_205141.jpg
     
  4. J0E

    J0E Registered

    Joined:
    Sep 26, 2019
    Messages:
    142
    Likes Received:
    55
    VoiceAttack should also do this as well as give you voice commands if you want them. I used VA with the Fanatec Universal Hub to be able to assign buttons greater than 22 and use the funky switch. Since then, I switched to my own DIY wheel with rotary encoders and now use a Teensy to handle the buttons and encoders. A plug for VA: it has a nice programming feature. Before they added Attack Mode to FE, I programmed a button to go into a boost mode (upped the power to 235kw) while the button was held down but only for 8 seconds. Further, my boost mode could only be used once every 75 seconds. That was all on one button programmed inside VA.
     

Share This Page