Help with first time setup

Discussion in 'Technical & Support' started by mugen5, Jun 25, 2021.

  1. mugen5

    mugen5 Registered

    Joined:
    Jun 25, 2021
    Messages:
    4
    Likes Received:
    0
    Just bought it yesterday and I think I will like it. But I have 2 issues.

    1. I have AccuForce 2 with Sim Commander. When sitting in the pits if I let go of the wheel it turns all the way left or right. Once at the end if i turn it slightly the other way and let go it will turn all the way to the max. Going down the straights it always wants to pull the wheel to the left r right. Also physical wheel is not synced with the wheel in the game. Steering wheel range is grayed out in the settings.

    2. I'm in VR and when I brake I move forward in the cockpit.

    I'm sure these are just settings but never had these in any other sims so not sure were to look.
     
  2. atomed

    atomed Registered

    Joined:
    Jul 9, 2019
    Messages:
    743
    Likes Received:
    585
    1. Try with the automatic setting of.the range in settings/calibration
    2. Maybe you can fix it turning off the head physics in the calibration menu in settings.
     
  3. mugen5

    mugen5 Registered

    Joined:
    Jun 25, 2021
    Messages:
    4
    Likes Received:
    0
    1. Was able to set the range so the physical wheel rotates the same as in game. Still have the issue were the wheel wants to turn by itself, even in the pits. It's hard to keep the car straight in the stretches.
    2.Turning off head physics fixed the problem.
     
  4. atomed

    atomed Registered

    Joined:
    Jul 9, 2019
    Messages:
    743
    Likes Received:
    585
    Did you set wheel center and top left and right?
    Edit: Try setting all driving helps off.
     
  5. mugen5

    mugen5 Registered

    Joined:
    Jun 25, 2021
    Messages:
    4
    Likes Received:
    0
    As far as I can tell all assists are off. I rotated wheel in appropriate spot and pressed max left, max right and center if that's what you mean.
     
  6. mugen5

    mugen5 Registered

    Joined:
    Jun 25, 2021
    Messages:
    4
    Likes Received:
    0
    Hadn't notice that you can specify your wheel on the assign tab. That fixed it.
     
  7. buddhatree

    buddhatree Registered

    Joined:
    Dec 22, 2011
    Messages:
    1,693
    Likes Received:
    244
    This is a known issue with some DD wheels. Here's the fix:

     

Share This Page