General DRS issue - error

Discussion in 'Bug Reports' started by Richard Hessels, Feb 28, 2019.

  1. Richard Hessels

    Richard Hessels Member

    Joined:
    Sep 5, 2011
    Messages:
    100
    Likes Received:
    44
    Fixed a few tracks with DRS zones.
    During practice and qualify DRS can be deployed everywhere.
    But FIA 2013 regulations state that they can only be activated in de regular DRS zones.
    https://www.bbc.com/sport/formula1/20351041
    AI is just using DRS at any straight line at the moment.
    In the race it works fine and the zones get activated after 3 laps.
     
    Last edited: Feb 28, 2019
  2. lagg

    lagg Registered

    Joined:
    Oct 1, 2012
    Messages:
    3,043
    Likes Received:
    1,958
    I think that his depends on the track config.
     
    Ari Antero likes this.
  3. Lazza

    Lazza Registered

    Joined:
    Oct 5, 2010
    Messages:
    12,346
    Likes Received:
    6,572
    You should be able to configure it correctly, I can't remember the details right now but you can make either way possible.

    If I remember correctly the first season (or two?) of DRS in F1 they were able to deploy anywhere they wanted in practice and qualifying, then they limited them to the same zones as in the race. And if I also remember that correctly we did the same thing in our league in rF2, but I probably wouldn't trust my memory on that one.
     
  4. Richard Hessels

    Richard Hessels Member

    Joined:
    Sep 5, 2011
    Messages:
    100
    Likes Received:
    44
    Did some more googling, finally end up at some PDF doc with this.

    RearFlapWetTreshold=X
    RearFlapZoneSessions=Y

    X= Maximum Track Wetness allowed for rear Flaps to be used (in any Session)
    Y= Allowed Session (add the Numbers: 1=Test, 2=Practice, 4=Qualy, 8= Warmup, 16=Race)

    For X normally is used the Value 0.5
    For Y you can define in which Sessions the DRS will be allowed, by adding the Numbers of the Sessions.

    If you e.g. want to allow it in all Session, add all Numbers.
    The Result is 31. So you use: RearFlapZoneSessions=31

    If you want to allow it only in Qualy and Race, add 4+16.
    The Result is 20.
     
    Last edited: Feb 28, 2019

Share This Page