Fanatec csp v3 not working in game

Discussion in 'Technical & Support' started by CPS__3, Nov 15, 2017.

  1. CPS__3

    CPS__3 Registered

    Joined:
    Nov 14, 2017
    Messages:
    8
    Likes Received:
    0
    The pedals are connected through the wheelbase. In the settings i loaded the Fanatec v2.5 profile and when i look at the input diagrams i have input from throttle, brake and clutch, but when i enter a practice session the car doesn’t move when i hit the throttle. Using the shifter paddles the car doesn’t go in another gear, only when i use the Fanatec sq shifter it does change gear but it goes to 2nd, neutral, 2nd, neutral and so on until i put it back in first. (The button mapping of neutral is set to empty)
     
  2. Christopher Elliott

    Christopher Elliott Registered

    Joined:
    Jul 31, 2014
    Messages:
    4,551
    Likes Received:
    7,538
    You may need to manually re-assign your inputs if your wheel is not on 'JOY1'.
    Click on each input in the list and press the control you want to use when prompted.
     
  3. CPS__3

    CPS__3 Registered

    Joined:
    Nov 14, 2017
    Messages:
    8
    Likes Received:
    0
    Allready did that, like i said i have input from all pedals when i’m In the control settings. Just not when i’m in a car.
     
  4. Christopher Elliott

    Christopher Elliott Registered

    Joined:
    Jul 31, 2014
    Messages:
    4,551
    Likes Received:
    7,538
    ok, what is the the exact name of the profile you loaded?
     
  5. CPS__3

    CPS__3 Registered

    Joined:
    Nov 14, 2017
    Messages:
    8
    Likes Received:
    0
    Fanatec wheelbase v2_5
    Throttle brake and clutch are standard mapped correctly.
     
  6. patchedupdemon

    patchedupdemon Registered

    Joined:
    Jan 3, 2017
    Messages:
    1,602
    Likes Received:
    1,151
    Try plugging the pedals into the pc instead,see if that makes a difference.
    You will get 12bit resolution then also instead of the 10bit when plugged into the wheel base.

    I have the v3s but have to use them standalone due to having a t300 wheel
     
  7. CPS__3

    CPS__3 Registered

    Joined:
    Nov 14, 2017
    Messages:
    8
    Likes Received:
    0
    I tried that already, same thing as in top post, input in control screen but in car nothing ...
     
  8. Christopher Elliott

    Christopher Elliott Registered

    Joined:
    Jul 31, 2014
    Messages:
    4,551
    Likes Received:
    7,538
    Any specific car you tried?
     
  9. CPS__3

    CPS__3 Registered

    Joined:
    Nov 14, 2017
    Messages:
    8
    Likes Received:
    0
    The megane and another which i don’t remember.
     
  10. CPS__3

    CPS__3 Registered

    Joined:
    Nov 14, 2017
    Messages:
    8
    Likes Received:
    0
    Anybody an idea of what’s wrong?
     
  11. The Iron Wolf

    The Iron Wolf Registered

    Joined:
    Feb 20, 2016
    Messages:
    984
    Likes Received:
    984
    Do you have auto clutch at off? I wonder if engine stalls.
     
  12. Bernd

    Bernd Registered

    Joined:
    Jul 9, 2013
    Messages:
    1,509
    Likes Received:
    755
    Are there any other controllers connected to your pc?
    If yes, disconnect all others and try then.

    A 2nd option to try, is to load none of the included profiles.
    Assign all buttons/keys/pedals manually and safe that settings in an own profile and use that.
     
  13. CPS__3

    CPS__3 Registered

    Joined:
    Nov 14, 2017
    Messages:
    8
    Likes Received:
    0
    None of the above managed to solve the problem, but thanks for trying.
    The problem was that auto pit was enabled, found out About it when i pressed the “toggle AI driver” button.
    Never changed those settings so don’t know how it got enabled.
    Just letting You guys know...
     

Share This Page