dd1 ffb inverted

Discussion in 'Technical & Support' started by Danielep91, Jul 16, 2020.

  1. Danielep91

    Danielep91 Registered

    Joined:
    Aug 4, 2012
    Messages:
    4
    Likes Received:
    3
    Hi all,
    I have the Fanatec Podium DD1, everything was fine, but after the last updated,
    my "steering effect strength" value get modified by the game everytime, so my ffb feel inverted

    I tried to set it manually from -10000 to 10000 and viceversa
    to delete the file and let rf2 create a new one but nothing
    to click "detect" and with his original set nothing happened
    all this, since I hit the track my ffb is inverted anyway

    any suggest?
    thanks in advance to you all
     
  2. bluet

    bluet Registered

    Joined:
    Sep 25, 2015
    Messages:
    63
    Likes Received:
    23
    Hi Danielep 91
    i am a simcube user just checked the controller file for DD1 and it should be be 10000 not minus /did you save the changes when you change them ?
    just a thought try the DD2 Controller profile see if that is reverse also

    Regards Denis
     
  3. Danielep91

    Danielep91 Registered

    Joined:
    Aug 4, 2012
    Messages:
    4
    Likes Received:
    3
    Hi mate,
    yes of course, I try to save it but everytime I press race, it changes for the opposite.
     
  4. Kevin van Dooren

    Kevin van Dooren Member

    Joined:
    Sep 21, 2017
    Messages:
    56
    Likes Received:
    27
    Are you running rf2 when you try to save the changes in the json?
    You cant make changes to the json if rf2 is running, so first shut down rf2 and edit/save the json.
    Then restart rf2.
     
  5. Lazza

    Lazza Registered

    Joined:
    Oct 5, 2010
    Messages:
    8,198
    Likes Received:
    3,583
    I argued with someone years ago about inverting that value, I can't remember now whether I was arguing you can or I was arguing you can't. The point is some of us seemed to be able to, others it reverted - even when edited with rF2 off. Might need to go up a level, load a different profile and see if you can find one that works.
     
  6. Danielep91

    Danielep91 Registered

    Joined:
    Aug 4, 2012
    Messages:
    4
    Likes Received:
    3
    No, I save it before and then I run rf2, as I said, soon I press "race" it keep change it
     
  7. bluet

    bluet Registered

    Joined:
    Sep 25, 2015
    Messages:
    63
    Likes Received:
    23
    do you try the DD2profile
     
  8. bluet

    bluet Registered

    Joined:
    Sep 25, 2015
    Messages:
    63
    Likes Received:
    23
    C
    Can you invert on your fanatec wheelbase profile?
     
  9. lagg

    lagg Registered

    Joined:
    Oct 1, 2012
    Messages:
    1,756
    Likes Received:
    1,102
    1. Save your settings with a different name.
    2. Close rF2
    3. Open the file that you have created with a text editos (Notepad, etc)
    4. Change the sign of the "steering effect strength" value.
    5. Open rF2
    6. Load the controller that you created in the first point again
    The point 6 is very important.
    Before you re-load the profile, rF2 is telling you that is using that, but it's not true.
    You have to load again that profile to apply the changes made by hand in the file.
     
  10. davehenrie

    davehenrie Registered

    Joined:
    Jul 6, 2016
    Messages:
    3,458
    Likes Received:
    1,968
    Does the advice NOT to touch the menus AFTER making text edits still stand? It used to be if you changed menu items then an entire new json would be saved and over-write your changes.
     
  11. Danielep91

    Danielep91 Registered

    Joined:
    Aug 4, 2012
    Messages:
    4
    Likes Received:
    3
    Thank you all guys for the help. At the end the problem was..... steam!

    As mistake on steam probably in the game properties - general - I've activated the "general steam input settings".


    sorry all for the time wasted
     
    Lazza, lagg and davehenrie like this.

Share This Page