Canadian Tire Motorsport Park

please check the grip of the track when using naturally progressing preset for real road and driving porsche GT3 car
 
senormen said:
aye . . . couple of verts sticking up from the physics mesh . . . all fixed now . . .

will be having some serious words with the test team :rolleyes:
Click to expand...
Most testers are better than average drivers and thus never find the odd stray off-line accidents that we poor drivers often do. :) Long long ago, I used to volunteer to find holes in tracks that cars could fall thru into the blue nothingness that were off the edges. You almost have assign a tester to exclusively drive on the curbs, or drive with all 4 wheels just outside any lines or curbing. Others can do the usual tests to see if the track is raceable but at least one guy should be looking for annomilies.
 
Last edited:
I am pretty sure none of test drivers were doing this with 1954 Jaguar D-type.

Actually track modeler can test fall through issue way quicker himself, unless there is some very complicated nuance in it.

Couple of free vertices floating that got there somehow are very easy to miss. There possibly are tracks which has such issues in such unlikely places to drive through that only 1 out of 1000 will ever notice that.
 
Today i tried again, great race, until the SC came out
20191011162958_1.jpg

20191011163020_1.jpg

when the SC crosses the pit line it disappears automatically proving that the ia slows down to 18 kph
I do not know if it is my game or the error of my car, in everything else the track is fascinating, very good work
:D:D
 
off line AI is not working correctly in rF2. This is a larger problem than just this track. Work-around is no flags or just black flag, no full course yellow flags. one hack was to reduce the safety car's speed to lower than 60 kph but that requires editing the mas files in dev mode and creating a 2nd track instance.
 
I got a chance to do some running on the circuit this evening using the March 761.

Unfortunately I ran into problems at Quebec with invisible objects on the racing line. The car didn't appear to be grounding out and all of the AI wrecked within twenty minutes.
I found at least two points on the track that caused damage:
GRAB_020.JPG
GRAB_021.JPG
 
please check the track limits.
this
is a cut track ?
sometimes its only a cut if you touch the sand at the end of the curb

better view

oh and this inivisible walls at the pit exit ... are invisible :D:confused:
 
Last edited:
Akela_DE said:
please check the track limits.
this is a cut track ?
sometimes its only a cut if you touch the sand at the end of the curb

oh and this inivisible walls at the pit exit ... are invisible :D:confused:
Click to expand...

aw . . . you tried to take a shortcut :p . . . afaik its not just a case of exceeding track limits that gets you a cut track warning . . . its if you exceed track limits and gain time you get a warning . . . hence why sometimes you get a warning and sometimes you dont ;)

could 'relax' the corridors at that point . . . what do you think ?

invisible walls . . . never saw any invisible walls :D
 
benborp said:
I got a chance to do some running on the circuit this evening using the March 761.

Unfortunately I ran into problems at Quebec with invisible objects on the racing line. The car didn't appear to be grounding out and all of the AI wrecked within twenty minutes.
I found at least two points on the track that caused damage
Click to expand...

yes . . . been working my fingers to the bone reworking the track mesh . . . almost there i think ;)
 
senormen said:
aw . . . you tried to take a shortcut :p . . . afaik its not just a case of exceeding track limits that gets you a cut track warning . . . its if you exceed track limits and gain time you get a warning . . . hence why sometimes you get a warning and sometimes you dont ;)

could 'relax' the corridors at that point . . . what do you think ?

invisible walls . . . never saw any invisible walls :D
Click to expand...

i NEVER take shortcuts! period! :cool:;)

yes, plz, a little bit relax would be nice. It FEELS like the white line is the border of tracklimits, not the curb ? So thats a bit like PC2 track limits ... this and the next lap ... :mad: but if i am the only one who complains
 
Last edited:
Akela_DE said:
i NEVER take shortcuts! period! :cool:;)

yes, plz, a little bit relax would be nice. i FEELS like the white line is the border of tracklimits, not the curb ? So thats a bit like PC2 track limits ... this and the next lap ... :mad: but if i am the only one who complains
Click to expand...

you are right . . . track limits are the white lines and by default when the track corridors are generated they stop at the inside edge of the rumblestrips . . . can push them to the outer edge of this particular rumblestrip ? ;)
 
yes, i would say so. For me the curbs are part of the track ?, so if i have two tires on it, i am fine. White line, which white line ? o_O On this position you are also very often on the edge because of the speed.
But i am no way a pro, so ask the other guys as well.
 
Thanks very much Senormen. One of my favourite tracks from AC, and previosly in iRacing.

A few points i've noticed.

The formation lap doesn't work, with the cars grinding to a halt after the safety car enters the pits.
(also after a full course yellow, the AI are unable to get going again)

Many objects at night are very very bright, like in pit lane, the illuminated buildings.

Some objects up on the bank to the left of the start/finish straight pop in very abrubtly in cockpit cam
(ok in other cams)
2019.10.13-23.27_01.png 2019.10.13-23.28.png

The real road stops around this area
2019.10.13-23.25.png
And starts again as you go round the corner and down the hill.

Drives wonderfully though, hope you can find the time to address a few issues for this great track.
 
Actually, i just rechecked the AC version and the rubber stops and starts in the same place as the rf2 version, so maybe its not the real road, but simply a road texture?
 
You must log in or register to reply here.
Back
Top