Hi Can anyone help me am pretty new here I want to set up the above car with these settings Spring Rate 275 Lbf/in 300 Lbf/in Ride Height 67 mm under front bulkhead just above bodywork 70 mm under rear of chassis under triangulation tubes Static Camber -1.75 Degrees -0.75 Degrees Droop Minimum 15 mm at dampers at SRH (also fit droop restrictor tab if possible) Minimum 35 mm Castor 4.5 degrees N/A Toe** 0.2 Degrees OUT 0.25 Degrees IN ARB O/D 0.75 in (NEW) 0.5 in ARB I/D 0 in 0 in ARB Lever Arm* 155 mm (NEW) 185 mm (NEW) Dampers SEE NOTES BELOW Tyre Pressures (starting point, refine through temperature) 18 psi HOT 21 psi HOT Bump Rubber KONI 8212 30 mm parallel KONI 8212 40 mm parallel Packers (Damper Clearance @ SRH) 9 mm 25 mm anyone help or assist happy to pay a small donation.
Just posting once will do. Maybe you can delete your others. Can you further explain? Are you looking to modify an existing car or make a new one, at least physically? Your list looks more like a modification, except things like springs you don't change unless weight etc is changing. For a 'new physics' mod you'd need a lot more info and references.
Sorry didn’t realise I had posted twice whoops The settings I have put above I would like to mod the car if possible the car being a Brabham. These settings are my real life settings. I would like the car to handle and act as if I was driving my old car round the track.
Hi @Chris Lesperance this is the car https://steamcommunity.com/sharedfiles/filedetails/?id=926662201 it’s an old classic I just need to work out how to modify the settings for me in effect. regards simon
