Hello. My T500RS disconnects randomly when i Race/Practice, using the latest Build. I only see that "Input Controller has Changed" or something like that in the message box and after a secound iam holding a completely wrong centered wheel in my hands. I can pause the action, plug the wheel out and in, let it center and can continue driving. I firstly thought my wheelbase is broken, but i can race for hours in RBR or rF1 (with Realfeel) with no problem. My System Specs: OS: Win7 Ult MB: MSI Z87 G41 CPU: 4670K@4,2 fixed GPU: GTX760 Greets
Are you plugged into a Hub if so disconnect it and plug straight to pc..............If not try another USB port.....
I dont use any Hubs and tryed USB 2.0 and 3.0 Ports. Makes no difference. Would be nice to get more information out of the Game. I also use a SHH-Shifter, but cant see if it also disconnects when i use it. But i see, that iam using an older driver for the wheel, so i will first update it.
Two days and ~5h without any problems and today it happened again two times with the latest Driver. Seems like it happens when the Wheel is spinning fast, but i cant provoke it simply by rotating it fast or drifting with 1080° and hard FFB.
It sounds to me like this issue might not be with rF2, but that rF2 is causing the symptom to present. First thing I would do is to remove or reduce the overclock on the CPU, then if that doesn't help, I would suspect the PSU. When there are problems with USB port disconnects, I would think it's more likely a hardware problem than software causing it.
Setting it to default clock doesn't help. Also tryed the 4.2GHz overclock with prime95 and furmark on the secound screen. It worked well after a while (physics sync?) but you mean the wheels PSU, right?
Today the Wheel did the same thing for the first time in another Game. So it should be a Problem with my PC or Wheel. Thread can be closed.
Just check your plugs and make sure there plugged in and wheel also make sure thats screwed in tight also , as mine had same type of issue
I think you are right, i had to reassemble my Rig and rearrange the wires. Iam not sure but it works at least until now, thank you.
OK just to add I found my wheel had a broken pin in the din plug between wheel and base causing random disconnects.... I just pulled out the patch lead from wheel I wasn't using a replaced it now good as gold but am working on fix for this as thrustmaster are useless and dont have this part as a spare...........and didnt want to help me either....
In my case i think it was the bend in my power cord. Wanted it all clean and maybe put too much stress on the din plug. If it fails agein i will solder it... dont want a disconnect when playing online.
