[REL] FVR V8 Supercars 2014-2016 v6.5 Updated- 18 February 2017 - UPDATED FULL INSTALL

Hi SS do you use the tyre surface temps or the rubber temps for you camber assessment? In rf2 a more accurate tyre temp is the rubber one measured with a plugin and viewed after esc. This is what I have found. The brake temps are for the actual pads that V8SC use but the figures come from ISI physics. I have since found some beter figures witha broader temp range which sounds more feasible given that they take the raeal car to 900/1000C.

Will look at adding some graduation to the brake ducts

Cheers

 

Hi FlashQld,
Thanks for your reply, sorry I didn't see it at first, I did see Feralarri's and replied straight away, then I saw yours. Anyway thanks for passing it on, I'm sure that will make this mod the best V8s out there for a long time to come.

SS

 

Hey Feralarri,
I've only ever used RF2s Tyre surface temps as the guide to get cambers right for me. What is the plugin that you use?

SS

 

http://isiforums.net/f/showthread.php/25689-DAMPlugin-for-rF2

http://isiforums.net/f/showthread.php/3336-rFactor-2-Telemetry-Plugin?highlight=Motec+plugin
First link is your plugin. The second link is an older version but has some setup info and description. You need to DL software to view just read the posts

 

Quick heads up FlashQld, the link to the Nissan (v6.0) seems to be broken.

Other cars are fantastic. Great work!

 

We checked n this link and all seems to be okay, where are youfinding this problem.

 

Without having to 'crack' the MAS file, what are the weight penalties for each level of driver aid?

 

Obbzy to the best of my knowledge this is how it works. each of these have a off setting and when turned on apply weight as per schedule.

TC: set 1=28.2kg, set 2=42.3kg
ABS: set 1=28.2kg, set 2=42.3kg
Stability: set 1=28.2kg, set 2=42.3kg
Autoshift none
Steering : set 1=28.2kg, set 2=35.25kg set 3=42.3kg
Braking: set 1 70.5kg, set2 141kg
Invulnerable: None
Opposite: set 1 70.5kg
Spin Recovery: set 1 70.5kg
Autopit: None
AutoLift: None

 

Would be nice to have seat adjustment forward more than 100. It's unusable on a single screen. 300-350 suits my screen on most mods. I use bonnet view in these v8's.

 

Hi Machine this should already be available if you have 6.1 version. Seat range from -150 to 250

 

OK, will give it a go again. It must have been one of the previous versions I tried.
And thanks for freeing that up a bit.
And it is about more than just screen size. I always felt as if I was driving from the back seat. As in the back seat regarding the cars rotational centre. Yes, graphically, you appear in the centre.

 

Crazy Australia... starkly race series and madness racetracks!



Great thanks to Nibiru for the help with the car-setup. Yummy!

Edit: track runs on the server of http://www.xfactorracing.com

 

Tried on 6.1 it went forward to 150. Just OK, could be a bit more, but for a part timer like me, it will do.
See the back seat driver in the video above. On my screen, the window slit is 2 inches high.

 

hi guys i noticed that the ford link to 6.1 is broken all the other ones work great

 

Where are you trying to get the link from. Steam or mediafire.

 

Any info on the 6.2 update downloaded via steam workshop. As far as i can see there are no compatible servers with this version available, is there a problem with updating dedi servers to this version?

 

from this site on mediedifire but its working again now mate

 

6.2?! I was just about to ask why do I have both a 6.0 and 6.1 in my Steam? Can't uninstall the 6.0, though I doubt it is needed for any reason.

 

Metadata.vdf info
"workshopitem"
{
"appid" "365960"
"publishedfileid" "701607507"
"contentfolder" "E:\SteamDevPackages\FVR_V8SC_2016\content"
"previewfile" "E:\SteamDevPackages\FVR_V8SC_2016\content\preview.jpg"
"visibility" "0"
"title" "FVR V8Supercars 2014 - 2016"
"description" "FVR V8Supercars 2014 to 2016 simulates the 2014, 2015 and 2016 Australian V8 Supercars Championship. We have tried to get as much detail in these as we can imagine. We also have a User Interface for the mod to have a subtle blend colour. The mod has multiple options in it to suit various configurations of how you want to drive, you can change configurations of the cockpit. The diff ratios and tyres are set for the Australian tracks, with subtle annual changes.

Please understand that if you find a fault we are only human let us know as we may be able to update. We do this for our own enjoyment and hopefully yours along the way.

Uninstall all previous versions.

Special thanks to the following:
Ferret40 - Skins and templates
dBens1 - Physics
Feralarri - Physics, Tyres and assisting with compilation
Bebop01 - All sounds
FlashQld - All 3D models, scripting and stuff

FVR Special Access Members for their feedback, testing and fault finding. A few of you guys went above and beyond, stay tuned for some more testing very soon.

JimmyT
RockShark
Aerobaticrug
K9VING
noobsbane283
Sals1
bigchook
buzzhornet
craigbowie


FVR Members for just being there.

Our dogs, cats, partners and kids.


PS is you fancy you can do the 2013 season let us know so we can include it. We'll be happy to help where possible."
"changenote" "Version 6.2 is the 6th public release and and performs some physics tweaks. We have removed 6.2 in the short term to fix an issue - sorry for the inconvenience."
}

 

6.0 was the original release in June 16. 6.1 was a small update released after this.
6.2 another small update was released a day ago but there is some issue with it loading so it has been removed temporarily. So at the moment you should have 6.0 as s base and 6.1 as a update.