Adjust mirror position

Hi,
can´t change the mirror position with STRG+Seat Adjustment keys.
Just here the guy screaming "mirror, mirror..." but the mirror position doesn´t change.
What do i wrong?

 

Incar or on the hood/bonnet

 

Incar and with cockpit view...

 

Which mirror are you trying to adjust, different key combinations adjust different mirrors.

From the PLR file :-

Code:

Mirror Adjustment Horiz="0.00000" // use Shift+Seat* controls to save by vehicle
Mirror Adjustment Vert="0.00000"
Mirror Physical X="0.00000" // use Shift+Alt+Seat* controls to save by vehicle
Mirror Physical Y="0.00000" // note: these physical mirror position adjustments are for the in-cockpit center mirror only
Mirror Physical Z="0.00000"
Left Mirror Horiz="0.00000" // use Ctrl+Seat* controls to save by vehicle
Left Mirror Vert="0.00000"
Left Mirror Size="1.00000"
Center Mirror Horiz="0.00000" // use Ctrl+Alt+Seat* controls to save by vehicle
Center Mirror Vert="0.00000"
Center Mirror Size="1.00000"
Right Mirror Horiz="0.00000" // use Alt+Seat* controls to save by vehicle
Right Mirror Vert="0.00000"
Right Mirror Size="1.00000"

 

Thanks a lot...

 

I have the same problem. The mirror controls no longer work with 85.

 

Same here, I hear mirror mirror but no adjustment in virtual mirrors. Cockpit view F3.

 

I have no mirrors in the Spark F3 ...all black...

 

I believe you can only adjust the real mirrors with those controls, not virtual mirrors.

 

Now I can move virtual mirrors up and down but not side to side. I did not change anything.

 

Virtual mirrors up/down should be SHIFT+SEAT UP/DOWN keys.
Virtual mirrors side to side should be SHIFT+SEAT FORWARD/BACK keys.

 

"Virtual mirrors up/down should be SHIFT+SEAT UP/DOWN keys." does work

"Virtual mirrors side to side should be SHIFT+SEAT FORWARD/BACK keys" does not work

Reinstalled Build 85 over my existing install, detected wheel and redid button setup. Works as it should now.

 

bump.

I can not change the position of the virtual mirror with the above suggestions.

Anyone have an idea?