g25 setup 1) Go to E:\Rf2\UserData\Controller ( or where ever you installed the game to) 2) OPEN "logitech g25 racing wheel USB.INI " ( using note pad or word pad ) 3) scroll through the txt fill untill you see the section called [Force Feedback] 4) go down a bit more untill you see "Steering torque filter="0" // Number of old samples to use to filter torque from" 5) change it so it says "Steering torque filter="5" // Number of old samples to use to filter torque from" 6) save the txt file ( you can overwirte the origonal one or save it as a new one called "g25 good" for example 7) open the Logitech profiler 8) go to global device settings 9) set overall effects stregth at 100% 10) set spring effect 0% 11) set damper effect 5% 12) untick enable centering spring force in feedback games 13) untick report combined peddels 14) set degrees of rotation to 900 15) tick allow game to adjust settings 16) load the game 17) go to settings and then controles 18) you will see buttons for load and save profiles go to load profile and then select the profile you saved "g25 good" 19 ) set stearing wheel range to 300 20 ) I like to set "car specifc FFB multi at around 60-75 you can set it to what ever you like to get the stregth you want annything below 50 and you will start to lose allot of feel annything above 1.5 and you will have to go to the doctors for RSI. tips , you might want to change some of these settings but so far this is glowing me to get in the top 5 on servers with the default car set-up FFB is responsive and quick and it removes allot of the harsh bumps from curbs and grass , although grass and curbs are still a bit strong but ISI have said they might reduce that in the future.