Hello everyone. I have a problem with the STC2000 mod. When I start the engine and shift into first gear, the car accelerates a little on its own, even though I don't press the pedal at all. Everything works fine when idling. It's not the hardware. What could it be? If you are seriously interested in helping, write to me via PM. Then you can see for yourself.
Assuming you're using autoclutch, try manually holding a clutch in for ~5 seconds before putting it in gear. See if that stops it happening. The engine running at idle in Neutral is still connected to the gearbox (without the clutch being involved) and knocking it into gear before it (input shaft at least - not too sure which rF2 parameter controls that off the top of my head) slows down will provide enough momentum to impart some movement. So check clutch engage rates, clutch inertia, gear ratios, things along those lines.
Just as an Information: my Norton Anti Virus throws me a Warning about a Malicious Attack, when i click on the Screenshot and the pic-upload.de Site opens. That's not very trustworthy
i am using a manual clutch and dont see any throttle input on my dashboard when going into 1st gear. rpm at neutral are around 1600, when 1st gear engaged 1900.
I did check it already and did send an Update rfcmp to @memoNo1 There've been some "wrong" Lines in the Engine.ini, which seems to be a manually edited One, which is no good Idea in some Cases.
Oops, sorry @memoNo1 - I replied to your description, I couldn't see the image. Actual throttle input (probably automated, maybe auto blip or something) - that's entirely different to what I described
I think the main Reason have been these 2 Lines, that didn't make Sense at all: EngineBrakingLimit=(1, 1, 1, 1, 1, 1, 1, 1, 1) EngineBrakingGear0Limit=(0, 0, 0, 0, 0, 0, 0, 0, 0) and i also added a missing Line for the IdleRPMLogic=..., but that didn't have an Effect. Normally the whole Engine should be redone with the Physics Spreadsheet, because, as said, i think that it was edited by Hand. But in the Moment when the reported Problem was solved, i decided to stop testing and investigating.
I forgot.... if someone is interested, here is the Dropbox Link to download the Update rfcmp: Download
This car includes 'antilag' feature, which is made by means of RF2 engine brake config. If the engine brake config is modified maybe the antilag will not work, or malfunction.
Then it was probably not made properly, if it raises the Idle Rpm when a Gear gets engaged. (My Opinion) And how it is now, i doubt that it will cause any Malfunction.
