Heeelp ! Sweet Late Model dirt stockcar mod I need a physics guru I have 1 small problem

Discussion in 'Car Modding' started by Brian Perry, Jan 7, 2021.

Tags:
  1. Brian Perry

    Brian Perry Registered

    Joined:
    Sep 18, 2016
    Messages:
    32
    Likes Received:
    55
  2. Brian Perry

    Brian Perry Registered

    Joined:
    Sep 18, 2016
    Messages:
    32
    Likes Received:
    55
  3. Brian Perry

    Brian Perry Registered

    Joined:
    Sep 18, 2016
    Messages:
    32
    Likes Received:
    55
    This is the setup svm file you have to use for car to work right . I should have posted this with Youtube video and download its hard to find time to keep up with all this stuff !



    VehicleClassSetting="2019_DirtLateModel"
    UpgradeSetting=(2049,0,0,0)
    //VEH=D:\Games\rFactor2\Installed\Vehicles\DLM19\1.0\DLM19_0.VEH
    //UpgradeClass=
    //Configuration=1
    //Brake Kit=0
    //Inner Liner=0
    //Wheelbase=0
    //Steering Ratio=2
    //Units=0
    //Note: settings commented out if using the default

    [GENERAL]
    Notes="Ride height is measured from the bottom of the chassis tubes, the splitter lies approx. 2-in lower and side skirts 4-in lower th"
    Notes="an the rear. Therefore, a 3-in front ride height gives approximately a 1-in splitter clearance and 5-in rear about 1-in skirt cl"
    Notes="earance."
    Symmetric=0
    //CGHeightSetting=0//17.32 in
    //CGRightSetting=0//52.0:48.0
    //CGRearSetting=0//48.0:52.0
    WedgeSetting=3//4.50 turns
    //FrontTireCompoundSetting=0//Short Track
    //RearTireCompoundSetting=0//Short Track
    //FuelSetting=67//18.0gal (N/A)
    //NumPitstopsSetting=0//0
    //Pitstop1Setting=72//N/A
    //Pitstop2Setting=72//N/A
    //Pitstop3Setting=72//N/A

    [LEFTFENDER]
    //FenderFlareSetting=0//0.00 in

    [RIGHTFENDER]
    //FenderFlareSetting=0//0.00 in

    [FRONTWING]
    //FWSetting=0//1

    [REARWING]
    RWSetting=2//15 deg

    [BODYAERO]
    //RadiatorSetting=0//1%
    //BrakeDuctSetting=0//Open

    [SUSPENSION]
    //FrontWheelTrackSetting=0//0.00 in
    //RearWheelTrackSetting=0//0.00 in
    //FrontAntiSwaySetting=0//Detached
    //RearAntiSwaySetting=0//Detached
    FrontToeInSetting=8//0.20 deg
    //FrontToeOffsetSetting=0//0.00 deg
    //RearToeInSetting=0//0.00 deg
    RearToeOffsetSetting=3//0.38 deg
    LeftCasterSetting=11//2.8 deg
    RightCasterSetting=14//5.5 deg
    //LeftTrackBarSetting=0//0.000 in
    RightTrackBarSetting=5//2.500 in
    //Front3rdPackerSetting=0//0.000 in
    //Front3rdSpringSetting=0//Detached
    //Front3rdSlowBumpSetting=0//1
    //Front3rdFastBumpSetting=0//1
    //Front3rdSlowReboundSetting=0//1
    //Front3rdFastReboundSetting=0//1
    //Rear3rdPackerSetting=0//0.000 in
    //Rear3rdSpringSetting=0//75 lbs/in
    //Rear3rdSlowBumpSetting=0//1
    //Rear3rdFastBumpSetting=0//1
    //Rear3rdSlowReboundSetting=0//1
    //Rear3rdFastReboundSetting=0//1
    //ChassisAdj00Setting=2//+2.5 cm
    //ChassisAdj01Setting=2//+2.5 cm
    //ChassisAdj02Setting=0//None
    //ChassisAdj03Setting=0//1
    //ChassisAdj04Setting=0//1
    //ChassisAdj05Setting=0//1
    //ChassisAdj06Setting=0//1
    //ChassisAdj07Setting=0//1
    //ChassisAdj08Setting=0//1
    //ChassisAdj09Setting=0//1
    //ChassisAdj10Setting=0//1
    //ChassisAdj11Setting=0//1

    [CONTROLS]
    SteerLockSetting=7//4:2.3 (Fast3)
    RearBrakeSetting=16//10.0:90.0
    //BrakePressureSetting=12//100%
    //HandfrontbrakePressSetting=0//0%
    //HandbrakePressSetting=0//0%
    //TCSetting=0//1
    //ABSSetting=0//1
    //TractionControlMapSetting=0//0
    //AntilockBrakeSystemMapSetting=0//0

    [ENGINE]
    //RevLimitSetting=22//9,900
    //EngineBoostSetting=0//1
    //EngineMixtureSetting=0//0
    //EngineBrakingMapSetting=0//0

    [DRIVELINE]
    FinalDriveSetting=31//2.90:1
    //ReverseSetting=0//3.50 (10.15)
    Gear1Setting=0//3.50 (10.15)
    Gear2Setting=4//2.27 (6.57)
    //RatioSetSetting=0//N/A
    //DiffPumpSetting=10//100%
    //DiffPowerSetting=0//100%
    //DiffCoastSetting=10//100%
    //DiffPreloadSetting=10//11
    //RearSplitSetting=0// 0.0:100.0
    //GearAutoUpShiftSetting=0//Off
    //GearAutoDownShiftSetting=0//Off

    [FRONTLEFT]
    //CamberSetting=0//4.0 deg
    PressureSetting=0//15.0 psi
    PackerSetting=7//0.437 in
    SpringSetting=14//650 lbs/in
    //SpringRubberSetting=0//Detached
    RideHeightSetting=8//4.000 in
    SlowBumpSetting=14//15
    FastBumpSetting=14//15
    SlowReboundSetting=18//19
    FastReboundSetting=18//19
    //BrakeDiscSetting=1//1.650 in
    //BrakePadSetting=0//1

    [FRONTRIGHT]
    //CamberSetting=0//-7.0 deg
    PressureSetting=8//19.0 psi
    PackerSetting=0//0.000 in
    SpringSetting=19//775 lbs/in
    //SpringRubberSetting=0//Detached
    RideHeightSetting=26//6.471 in
    SlowBumpSetting=9//10
    FastBumpSetting=9//10
    SlowReboundSetting=30//31
    FastReboundSetting=30//31
    BrakeDiscSetting=0//1.575 in
    //BrakePadSetting=2//3

    [REARLEFT]
    //CamberSetting=0//0.0 deg
    PressureSetting=3//16.5 psi
    PackerSetting=41//2.562 in
    SpringSetting=11//325 lbs/in
    //SpringRubberSetting=0//Detached
    RideHeightSetting=2//3.029 in
    SlowBumpSetting=14//15
    FastBumpSetting=14//15
    //SlowReboundSetting=6//7
    //FastReboundSetting=6//7
    //BrakeDiscSetting=0//1.385 in
    //BrakePadSetting=2//3

    [REARRIGHT]
    //CamberSetting=0//0.0 deg
    PressureSetting=1//15.5 psi
    PackerSetting=25//1.562 in
    SpringSetting=9//275 lbs/in
    //SpringRubberSetting=0//Detached
    //RideHeightSetting=24//6.000 in
    SlowBumpSetting=14//15
    FastBumpSetting=14//15
    SlowReboundSetting=30//31
    FastReboundSetting=30//31
    //BrakeDiscSetting=0//1.385 in
    //BrakePadSetting=2//3

    [BASIC]
    Downforce=0.500000
    Balance=0.500000
    Ride=0.500000
    Gearing=0.500000
    Custom=1
     
  4. Brian Perry

    Brian Perry Registered

    Joined:
    Sep 18, 2016
    Messages:
    32
    Likes Received:
    55
    Stability control set to low and traction control and anti locks set to off !
     
  5. Lazza

    Lazza Registered

    Joined:
    Oct 5, 2010
    Messages:
    12,345
    Likes Received:
    6,572
    Check your geometry. Sounds like your steering rack is going so far an arm is turning inside-out. Usually people do this with the a-arms (too short on top, wheel travels up and the top a-arm flips over the top) but will also happen sideways.

    Any time you get wheels pointing the wrong way with damage off you know you need to check your geometry or limit the movement.
     
  6. Brian Perry

    Brian Perry Registered

    Joined:
    Sep 18, 2016
    Messages:
    32
    Likes Received:
    55
     
  7. redapg

    redapg Registered

    Joined:
    Jan 16, 2012
    Messages:
    3,958
    Likes Received:
    2,808
    @Brian Perry I didn't download your Mod, so i didn't check it, but from what was written here, you could fix the Problem with one of my online Tools, i guess.
    Visit this Site and select the Tool "Modify the Angle of the Steer Lock" or "Create rF2 Steering Entries for the HDV or Upgrades.ini".
    With each of them, you can reduce the Steer Lock Angle and you get recalculated Values for the Steering Entries in the HDV (or Upgrades.ini).
     
  8. Brian Perry

    Brian Perry Registered

    Joined:
    Sep 18, 2016
    Messages:
    32
    Likes Received:
    55
    Its fixed ! I forgot the upgrades ini overrides the hdv thanks for refreshing my memory . I even played with ai values and got the ai working better than I thought it would ever work its dialed . Your site is awesome by the way I never seen nothing like that before .
     
    redapg likes this.
  9. Brian Perry

    Brian Perry Registered

    Joined:
    Sep 18, 2016
    Messages:
    32
    Likes Received:
    55
    Thank You Redapg and Lazza I wont wait so long to ask for help next time !
     
  10. redapg

    redapg Registered

    Joined:
    Jan 16, 2012
    Messages:
    3,958
    Likes Received:
    2,808
    Yes, it always worth it to ask here in the Forum when you get stuck with something.
     

Share This Page