Visual Bugs - GT3 Challengers, GT3 Power Pack, Endurance Pack GTE

Discussion in 'Bug Reports' started by FuNK!, Feb 15, 2019.

  1. FuNK!

    FuNK! Registered

    Joined:
    May 26, 2013
    Messages:
    626
    Likes Received:
    491
    Hey S397,
    some visual bugs I found during QC ;) (free of charge service by me :p)

    GT3 Challengers Pack
    Audi R8 LMS GT3
    [SOLVED] (1) Mirror has no mirror glass, (2) Wing fixture was painted over in most skins - was reported already
    (1) Someone has accidentally painted on the rims
    [​IMG]
    (W/O screenshot) Window banner not visible from the inside.

    Porsche 911 GT3R
    (1) Window banner not visible from the inside.
    [​IMG]

    GT3 Power Pack
    Bentley Continental GT3
    (1) Mirror has no mirror glass
    [​IMG]
    (1) Center mirror in cockpit without mirror glass
    (2) Transperency of the "window frames" is too high (i.e. you can simply see through - but this "bug" could be intended)
    [​IMG]
    (1) Front splitter has yellow areas without carbon texture (likely painted over)
    [​IMG]

    Callaway Corvette C7 GT3-R
    [SOLVED] (1) mirror.bmp-material-object in showroom or no proper mirror glass
    (1) Inside mirror has no mirror glass, no window banner visible on the inside
    [​IMG]
    (#) Rear (extra2 tex) shows some wrong stickers (here car #12 but others affected too!)
    [​IMG]

    McLaren 650S GT3
    [SOLVED] (1) Some minor imperfections on the normals at the front.
    () The low-res external cockpit has holes at the doors.
    [​IMG]
    () The normally black seat turns white in direct sunlight.
    [​IMG]

    Mercedes AMG GT3
    [SOLVED] (1) - (3) A lot of soft normals here! o_O
    (4) Still some very soft rims o_O
    [​IMG]
    [SOLVED] (1) A gap between underbody and body, you can look right into the car here.
    [​IMG]
    (1) Window banner not visible on the inside
    [​IMG]
    (1) Rear brake cooling air intake (?) painted, but should be black or having a grill texture.
    [​IMG] [​IMG]
    (1) Dark stroke painted over the "daylight"(?) texture in the headlights (looks like a wrong AO shadow).
    [​IMG]
    (1 - 2) No brake calipers visible in showroom.
    [​IMG]
    (1) Rear window frame incomplete (you can see through the roof into the cockpit)
    [​IMG]

    Radical RXC GT3

    [SOLVED] (1) Mirror has no mirror glass
    [​IMG]
     
    Last edited: Apr 30, 2019
  2. FuNK!

    FuNK! Registered

    Joined:
    May 26, 2013
    Messages:
    626
    Likes Received:
    491
    Endurance Pack GTE
    BMW M8 GTE
    [SOLVED] (1) mirror.bmp-material-object in showroom or no proper mirror glass
    [​IMG]
    [SOLVED] (1) Part of the rear splitter receives body color instead of carbon (maybe intended!?)
    [​IMG]
    (w/o screenshot) Window banner not visible from the inside.


    Chevrolet C7.R GTE
    [SOLVED] (1) mirror.bmp-material-object in showroom or no proper mirror glass
    [​IMG]
    (1) Window banner not visible on the inside.
    [​IMG]
    (1) Shouldn't there be a static radiator fan?
    [​IMG]

    Porsche 911 RSR GTE
    [SOLVED] (1) Mirror has no mirror glass, (2) alpha sorting issue with some button material from the steering wheel
    [​IMG]
    (1) Window banner not visible from the inside.
    [​IMG]

    Norma M30 LMP3

    (1) The wiper is too big or simply not correctly attached to the windscreen.
    [​IMG]
    (W/O screenshot) The aero updates appear to have no visual impact - bug or feature?
     
    Last edited: Apr 30, 2019
    memoNo1, bobbie424242, Donat and 3 others like this.
  3. FuNK!

    FuNK! Registered

    Joined:
    May 26, 2013
    Messages:
    626
    Likes Received:
    491
    Added a finding at the McLaren 650S GT3 to first post.
     
    mr.Sw1tchblade likes this.
  4. mesfigas

    mesfigas Registered

    Joined:
    Oct 15, 2015
    Messages:
    1,722
    Likes Received:
    830
    wipers at Norma M30 are cleaning a small area which makes them almost useless
    i speak about rain
     
  5. Christopher Elliott

    Christopher Elliott Registered

    Joined:
    Jul 31, 2014
    Messages:
    4,551
    Likes Received:
    7,538
    EDIT: Oops my mistake that is already fixed but not released.
    20190224220349_1.jpg

    Also Bentley has a stand in reflective material for outside cams, this is as intended.

    20190224220437_1.jpg
    I've been in the garage with the actual car, this is how the wipers are :)
     
  6. mesfigas

    mesfigas Registered

    Joined:
    Oct 15, 2015
    Messages:
    1,722
    Likes Received:
    830
  7. FuNK!

    FuNK! Registered

    Joined:
    May 26, 2013
    Messages:
    626
    Likes Received:
    491
    Updated first post with a description for the Callaway Corvette and two new minor findings on the Bentley.
     
    Donat likes this.
  8. FuNK!

    FuNK! Registered

    Joined:
    May 26, 2013
    Messages:
    626
    Likes Received:
    491
    I've updated my first two posts.

    The recent updates fixed a lot of stuff - what's great! But as I'm no beta tester (at least not yet :p ) my "aftermarket QC" may result in new findings. And there were a couple, so I've included those into the first posts as well.

    One thing that needs verification: According to the changelog of the Bentley, some visual changes were made (e.g. the mirrors). But unfortunately I didn't see these changes although I do have the latest (to date) version of the Bentley (2.47) o_O
     
    mr.Sw1tchblade and Donat like this.
  9. rafnix

    rafnix Registered

    Joined:
    Dec 16, 2014
    Messages:
    33
    Likes Received:
    3
    A rather old persisting issue at least I have still is
    rf 2 running vanilla after new PC and still outside mirrors way off on original cars. Issue present at both, screenplay and VR.

    This:

    "Mirrors are adjusted using Ctrl, Alt and Shift with the seat adjustment controls, Fore, Aft, Up and Down.
    When using Ctrl and/or Shift it doesn't matter if you use the left or right one.
    When using Alt, use Left Alt if you find Right Alt does not work. This is to do with your Windows region and keyboard settings. If you want Right Alt to work I'll leave that up to you and google search.

    * = the text that appears in the rF2 message box.

    • ALL MIRRORS, REAL AND VIRTUAL
    * Mirror Position: 0 / 0
    Shift + Fore = move mirrors left
    Shift + Aft = move mirrors right
    Shift + Up = move mirrors down
    Shift + Down = move mirrors up

    * Mirror Size: 0
    Ctrl+Shift + Up = zoom out
    Ctrl+Shift + Down = zoom in?

    • LEFT DOOR MIRROR
    * Left Mirror Params: 0 / 0
    Ctrl + Fore = move mirror outwards
    Ctrl + Aft = move mirror inwards
    Ctrl + Up = zoom out
    Ctrl + Down = zoom in?

    • RIGHT DOOR MIRROR
    * Right Mirror Params: 0 / 0
    Left Alt + Fore = move mirror inwards
    Left Alt + Aft = move mirror outwards
    Left Alt + Up = zoom out
    Left Alt + Down = zoom in?

    • REAR VIEW MIRROR / MONITOR
    * Center Mirror Params: 0 / 0
    Ctrl + Left Alt + Fore = move mirror left
    Ctrl + Left Alt + Aft = move mirror right
    Ctrl + Left Alt + Up = zoom out
    Ctrl + Left Alt + Down = zoom in?

    • REAR VIEW MIRROR / MONITOR PHYSICAL POSITION
    * Mirror Physical Pos: 0 / 0
    Shift + Left Alt + Fore = move mirror right
    Shift + Left Alt + Aft = move mirror left
    Shift + Left Alt + Up = move mirror up
    Shift + Left Alt + Down = move mirror down?

    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    The controls are your seat movement plus Ctrl/Alt/Shift; it doesn't matter whether you use the left-Shift or right-Shift, it's just Shift.

    Shift + seat forwards/backwards tilts all your mirrors left and right.
    Shift + seat up/down tilts all your mirrors up and down.


    Ctrl + seat forwards/backwards tilts your left mirror left and right.
    Ctrl + seat up/down zooms your left mirror in and out.

    Alt does the same as above, for the right mirror.

    Ctrl+Alt does the same as above, for the centre mirror.


    Ctrl+Shift + seat up/down changes 'mirror size' for all mirrors. Looks like an overall zoom of sorts.
    (There is a PLR option "Rearview Independent"; I think if you set this to 1 you can use Ctrl+Shift+seat forward/back to adjust the horizontal FOV of the mirrors independently of the vertical)

    Alt+Shift + seat up/down physically moves the centre mirror up and down.
    Alt+Shift + seat forward/back physically moves the centre mirror left and right.
    "

    doesn't work, at least not for the right side.

    All mirror parameters are at "0" which should be correct and original?

    Btw. mirrors at modded cars do work properly
     
  10. FuNK!

    FuNK! Registered

    Joined:
    May 26, 2013
    Messages:
    626
    Likes Received:
    491
    While I fully understand this is a necessary bug report, why did you post it here instead of a separate thread? For me this is no visual bug but a technical problem. I'm afraid this will easily be overlooked here. You should consider filing an individual bug report for that.
     
  11. FuNK!

    FuNK! Registered

    Joined:
    May 26, 2013
    Messages:
    626
    Likes Received:
    491
    Update the first two posts with new findings. Also removed some screens of solved issues ;)
     
    mr.Sw1tchblade likes this.
  12. FuNK!

    FuNK! Registered

    Joined:
    May 26, 2013
    Messages:
    626
    Likes Received:
    491
    Brief update here: As far as I can see, the recent updates did not solve/include any visual updates. Bug report remains unchanged.
     
  13. doddynco

    doddynco Registered

    Joined:
    Dec 13, 2017
    Messages:
    574
    Likes Received:
    1,217
    I'm not getting any cosmetic changes when I select different aero packages. It is the same with every car in the recent packs but here is an example: 1.png 2.png
     
  14. tlsmikey

    tlsmikey Registered

    Joined:
    Dec 29, 2016
    Messages:
    112
    Likes Received:
    139
    Don’t forget the missing yellow stripe at top of Porsche steering wheel. That’s been reported months ago and no change.
     
  15. Slamfunk3

    Slamfunk3 Registered

    Joined:
    Jan 6, 2012
    Messages:
    270
    Likes Received:
    126
    Wanted to add another visual/audio issue on the Audi R8 LMS. Seems the modeling (shift LEDs) and sound sides of the car are set to a 7700 RPM redline while the physics has it at the (correct, I believe) 8500 RPM. To get the most out of the car you need to rev way past indicated red line at which point the car is absolutely screaming. Saw this mentioned before but wanted to add it to here, hope that's cool.

    TK
     
    FuNK! likes this.
  16. Paulfield

    Paulfield Registered

    Joined:
    Feb 18, 2012
    Messages:
    235
    Likes Received:
    242
    Here is a small problem with the aston gt3 and gte. Must be a missing poly. Also proves gt3 was used to make the GTE as the back part of the missing poly is the same profile on both cars. GRAB_112.jpg GRAB_113.jpg GRAB_109.jpg GRAB_110.jpg
     
  17. LokiD

    LokiD Registered

    Joined:
    May 3, 2017
    Messages:
    1,282
    Likes Received:
    1,216
    In s397 defence why would they make the body again for aston vantage when they just need to alter the gt3, granted could of done a better job but so
     
    D.Painter likes this.
  18. D.Painter

    D.Painter Registered

    Joined:
    Oct 5, 2010
    Messages:
    1,039
    Likes Received:
    2,341
    That black mark is caused by the shadowing texture in the showroom only. It's not on the car when it's on track.
    As annoying as it is, it's nothing to do with the model itself.
     
    Paulfield likes this.
  19. davehenrie

    davehenrie Registered

    Joined:
    Jul 6, 2016
    Messages:
    7,454
    Likes Received:
    4,369
    I have no problem with the various parts being re-used because that is exactly how the real car was probably assembled. But there are just a few detail touches that scream GT3. Position LED mounted on the windscreen when all the rest of the GTE cars have the panel on the side.
    a tiny GT3 on the Cosworth LCD panel. Car behaves differently, drives differently, as a GTE should. They just missed a few items.
     
    LokiD likes this.
  20. Paulfield

    Paulfield Registered

    Joined:
    Feb 18, 2012
    Messages:
    235
    Likes Received:
    242
    Yes agree makes total sense I should have worded it better. I had no intension to be critical of doing this.
     
    LokiD likes this.

Share This Page